Air Quality Monitor Enclosure / Arduino Project case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case to house air quality monitor parts and a 60x60mm fan. Compatible with M3 heat-set inserts.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a simple air quality monitor project enclosure.
The case is compatible with a 1.3" OLED screen, a 60x60mm fan, and 2 MTS switches. The enclosure is compatible with M3 heat-set inserts.
This case can be used for any arduino project that fits inside.
Please use the STEP file to modify the design to your liking.
Components:
The electronic components that I have used for my project are the following:
MTS-102 switches x 2
ProtoBoard 58 x 78mm Pitch 2.54mm (outer dimensions are 80mm x 60mm)
OLED 1.3 inch I2C Display
Adafruit SGP30 Air Quality Sensor
USB-C Basic Breakout 4 Pin
SHT-40 Temperature & Humidity Sensor
Seeed Studio Xiao RP2040
6020mm fan (5V)
Printing:
The model needs only one support tree as shown in the image.
Mine was printed from SA Filament Clear PETG with only walls (solid) to create a smooth and clean look.
(Note: The display works without issue but it difficult to photograph...)
