1 / 2
Storage Tray for AZ-EQ5 Pier Telescope Tripod — zdjęcie 1
1 / 2

Storage Tray for AZ-EQ5 Pier Telescope Tripod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tray/shelf to keep your eyepieces secure and in easy reach while observing. Sized for Core One L.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
18
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Molded-in recesses for 1.25" and 2" eyepieces mean no fumbling with caps in the dark.

I printed in white PETG with 8 perimeters and 25% infill.  The result is really sturdy and looks like it came from the factory. 

This shelf slides snugly over the pier tube.  To install it, you need to disconnect either the top or the bottom of the tube.  The bottom is probably easier (3 screws) but on mine, they were installed too tightly to remove.   Disconnecting the top only takes minute though:

  • Remove the 3 screws holding the pier top plate to the tube

  • Loosen the allen screw on the flex shaft coupler

  • Remove the drive screw from the flex shaft coupler

  • Remove the flex shaft 

With one end disconnected, slide the shelf onto the tube and reassemble.