Storage Tray for AZ-EQ5 Pier Telescope Tripod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray/shelf to keep your eyepieces secure and in easy reach while observing. Sized for Core One L.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
Molded-in recesses for 1.25" and 2" eyepieces mean no fumbling with caps in the dark.
I printed in white PETG with 8 perimeters and 25% infill. The result is really sturdy and looks like it came from the factory.
This shelf slides snugly over the pier tube. To install it, you need to disconnect either the top or the bottom of the tube. The bottom is probably easier (3 screws) but on mine, they were installed too tightly to remove. Disconnecting the top only takes minute though:
Remove the 3 screws holding the pier top plate to the tube
Loosen the allen screw on the flex shaft coupler
Remove the drive screw from the flex shaft coupler
Remove the flex shaft
With one end disconnected, slide the shelf onto the tube and reassemble.