Kid Goku flying on Nimbus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge of young flying on Nimbus
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 195.58x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
#000005 PLA Deeplee Black Transmission Distance: 0.1
#57361c PLA Overture Chocolate Transmission Distance: 0.2
#0032a0 PLA Inslogic Blue Transmission Distance: 3.6
#c64343 PLA Inslogic Matte Red Transmission Distance: 2.8
#ff8000 PLA+ Sunlu Orange Transmission Distance: 5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
#ebb791 PLA Geeetech Matte Skin Transmission Distance: 3.4
#ffff00 PLA Elegoo Matte Sunshine Yellow Transmission Distance: 6
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Chocolate
At layer #8 (0.72mm) swap to Blue
At layer #9 (0.8mm) swap to Matte Red
At layer #12 (1.04mm) swap to Orange
At layer #15 (1.28mm) swap to Jade White
At layer #18 (1.52mm) swap to Skin
At layer #20 (1.68mm) swap to Sunshine Yellow
At layer #21 (1.76mm) swap to Jade White for the rest.