475 modeli
CURRENTLY HAS A FLAW: 4010 fan cables have no space to pass along stock cable route. Currently working on it, or you can sand it enough for them to fit😆. Originally made by 3D Printer Guy on his Discord server for older Dragon Burner tool…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use two colors for best results. Set includes +5k, +6k, +10k, dual attack, double strike, and dragonballs for once per battle activation tracking.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
This is a tweak of the support bracket only to pull the hole over in X/Y/Z. Print multiple copies to get a clean print.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A dragonman Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and MyMiniFactory . Let me know…
I am a huge Dragonball fan. I made these Dragon Ball keychains, I was a little undecided as to how I wanted my keychain, so I did some testing. I asked my friends which was the coolest to publish it, but they all had different opinions,…
MY SETTINGS FOR THIS PRINT: -Nozzle 0,40mm -Filament 1,75mm -Layer 0,08mm -Infill 5% -Walls 2 *PRINT THIS MODEL UPSIDE DOWN
MK8 Hotend mount for latest Dragonburner v8 with standard sherpa mini extruder pattern. Assembly: add two “voron” 3ID*5OD*4H heat-inserts slide hotend from the bottom secure with m3*16mm screws into mount Note: this is only mount, you…
Rear mount to mount the EDDY BTT sensor on the DragonBurner toolhead
AUG 2024 - V0/Printers for Ants: Do not print this!!! I hope to have a V0 compatible mount when finishing my Hex-Zero build. Carto/Beacon sits already very close to the bed, I didn't like how the stock probe mount had the risk of screws…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Hello 3D Printing friends. The idea for a filamentcutter arose after i installed an ERCF on my Voron 2.4. But none of the existing could…
This mount is made to accept a dragonburner/mini stealthburne for ender 3 neo printer with linear rail in the x axis. Print with minimum 4 wall and +40/50 infill you can go 100%. Height of cr-touch can be changed when you want . Made an…
My DM made a remark about the Dragonborn by BriteMinis not having a tail, and that he would really like to have a version with a tail. Here you go. Huge thanks to Brite Minis for creating their wonderful miniatures in the first place!
This model adapts the V0.2 Umbilical PCB holder to be compatible with the DragonBurner toolhead and the Sherpa Mini as the extruder. You need 4 standard M3 heat set inserts for the spacers. The original spacer are not long enough and have…
Remixed the previous model, adding a base to make it easily printable, and colored it to support bambu printers
Dragonborn Paladin dnd miniature with a battleaxe. There are two file versions: one with a base and one without. I sculpted the model in Zbrush and scaled and rendered it in Blender. I recommend printing it using a resin printer.…
This remix allows you to easily mount an Eddy probe on a Dragonburner toolhead. I used Chirpy's 'Carriage_Base_Short' as the base for this design, making adjustments to fit the probe securely. It keeps the probe at an optimal distance for…
Fantasy - Dragonborn Warband: heavy infantry guards with swords, medium infantry warriors with spears and bows, light infantry levies with javelins for 28mm wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't…
This was in my ta do list and a request a couple of months back from a drop box link. But the file was just called helmet, so unfortunatley I cant recall whom it was or what it is supposed to be called. If you do recognise this helmet let…
I remixed this model from https://www.thingiverse.com/thing:2272830 by https://www.thingiverse.com/Cronos-FDM The first few renders have additional detail not captured in the 3D models The PCB is more simple than the renders The words on…
Printed it with black PETG and the organic support. Works good. The whole bust is approx. 13cm high but it can also be resized if needed.
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Goku Dragonball I film what 3D printing actually earns me, including what uploading models like this one pays: watch the video . More of my projects: kirimas.com
Hi guys. I made a bust from the model of gabrieel22 (https://sketchfab.com/3d-models/goku-ssj4-9bab9434206c45fa8830f2ffcfe2ea8a). I reccomend to print it in resin. If you like, please press it :D
I wanted to use the Dragonburner on my Voron 2.4 with galileo (G2SA), cartographer and EBB. I also wanted to keep the endstop, but didn't like the original huge pilar. The MGN12H carriage has a wireduct for the endstop and cartograph I…
I drew the logo for the series Dragonball/ Dragonball Z and equipped it with an illustration. The logo can be scaled. I have scaled it on the MK3 to 170% in X and Y. The letters should be printed individually. It takes some patience,…
Please print using standard Voron parts print settings
The TZ v6 2.0 hotend is pretty cheap and i wanted to give it a try on my DragonBurner Toolhead (with Sherpa Mini mounting pattern). I prefer to use v6 nozzles, which fit the hotend, but increase the length of it by a bit.
If you like my parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Please take a look at the newest version of this cutter This is an evolution of my Dragonburner-filamentcutter. This Model is not fully…
I like the Picobilical PCB style mount and the angle at which it is mounted. But I don't like the way the PCB is mounted. So I modified the Picobilical PCB mount to fit the Umbilical from the Formbot kit on the DragonBurner. The PCB is…
2024-10-21 added different height spacers, Carto should be 2.6mm to 3mm Z distance to the nozzle added Esoterical offset measuring tool from Carto Discord (Carto's coil pcb on the “hills” and nozzle on the long flat side) this is a remix…
Easy to print TTRPG (DnD) player character of a female dragonborn rogue thief. Wokrs well with 0,2 and 0,4 nozzle. Made for 25mm and 28mm scales.
Upgrading my old CR10 v1 with the new Dragonburner v8 hotend and G2SA extruder. However I noticed a lack of filament sensor options for both, and I have just completed building my ERCF and needed a filament sensor for calibration. I chose…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Printed on my MK4 with MMU3, with 0.25mm nozzle, and variable layer height. Hatchbox Grey PLA. Depending on your printer configuration and settings you may need minimal supports. I still need to clean up print as you can see some of the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Build a dragonburner for your ender 3! It should be compatible with the original ender 3 through the v2 model. I modded Romans mount to retain the original x axis position to keep compatibility with the klack ender mod by kevinakasam. You…
These two plates allow you to mount the Ender 3 variant of the TZ hot end to your Voron on a Dragonburner. This variant of the mount is a through hole design right to the MGN12C. The front and back brackets you need are included in the…
Just a simple Bookend with Dragonball Design.
The TZ V6 2.0 becomes 1.8mm longer with a V6 nozzle. This offsets the dragon mount back by 1.8mm to make the nozzle position correct again (see pic). This makes it incompatible with the original tiny nozzle it comes with since that is too…
Two ultimate rivals of the Dragonball anime series. Can be printed as a single piece or separate if plate size doesn't allow to print it.
It's a remix of the Ender 3 DragonBurner mount. Modified the toolhead mounting holes for brass inserts to be installed from the back for a more secure mount.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #12 (1.04mm) swap to Blue At layer #15 (1.28mm) swap to Orange At layer #21 (1.76mm) swap to Jade White for the rest.
It uses the top holes to mount TZ E3 2.0. Uses m2.5x12 x2 screws.
Remixed another of ortizimo's creations to better suit what I was after. 20mm thick Z to sit up next to a DBZ Pop Vinyl collection. Black backing is inlaid with the Red/Orange parts. Print settings shouldn't matter again with this one…
28mm Dragonborn Warrior with javelin Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
This is just a remix of a Oni Genji Dragonblade from overwatch. The only things that I've changed are that all part files are in one print so you don't have to print all of them individually, and also I've made it so that it is measured…
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
Re-aligned the holes to correctly fit the MGN12C Block. Redesigned to work with Ender 3 belt system.
28mm Dragonborn Warrior with Bow Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes Supports: Yes Resolution: 0.2 mm Filament: Creality PLA White Notes: I added support for the bow directly in the file Category: Games
Dragonborn Paladin miniature for tabletop RPGs. Equipped with dragon-themed spear and shield. Create custom, print-ready miniatures at [** Miniature-Maker.com **]( https://miniature-maker.com ). Generate unique characters in minutes for…
Dragonball Z Fusion Bookends Remixed the Dragonball Z Fusion book ends that diegoozanan created on Thingiverse. Designed a mounting base and new stand for the characters, they now screw to the base and/or stand using M3 countersunk…
must add supports to model
This is my take on a Dragonborn Paladin. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
A static pose of Goku transformed into a Super Saiyan from the Dragon Ball series. Enjoy!
This is my take on a Dragonborn Warlock. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
This is my take on a Dragonborn Barbarian. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
Update 03-08-2024 Uploaded a V2 with less obstruction for hotend fan Included .step file format to make mods easier It is a mounting plate for the DragonBurner toolhead (https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner) Huge…
Mod for mounting Dragonburner toolhead to vertical MGN9H linear rail and compatible with all Voron probe mounts. Spacer needs to be included for the voron printers. Print using Voron presets and tree support touching bed. Also need to…
those who love Dragonball will appreciate it
This is my Double-headed Dragonborn Paladin. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . If you like it and/or…
Adapter to fit the DragonBurner toolhead to Creality machines. Built for a CR10 but should fit most Creality machines with the generic Ender 3 hot end. V4 Dragon burner used, cannot guarantee fit with other revs.…
Ozaru, the giant ape into which the Saiyans transform.
Feito para fãns de DragonBall Z.
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White…
This is my take on a Dragonborn Druid. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
simple dragonburner mount for the hgx
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
A Dragonborn RPG figure created in TitanCraft for games like D&D.
28mm Dragonborn Line Infantry Soldiers with muskets Made with Desktop hero 2.0 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Filament: Creality PLA Category: Games
Dragon Ball Z wall art Leave a comment of your suggestion Category: 2D Art
The lever arm is longer, providing additional leverage The lever's width is wider, providing more material around the fulcrum (a weaker part of the original design) After about 1000 cuts it would break. Widened holes on lever for screw at…
Perfect for 42mm Dragonballs
Some extra parts for using the Dragonburner toolhead on an Ender 3 V2
Summary This is a remix of Chirpy's DragonBurner Toolhead that adapts it to be able to use Bambu Lab's new quickswap hotend ecosystem.. 🛠 Bill of Materials (BOM) Original Hardware. Some more threaded inserts, recommend 3 of them to be 3mm…
Dragon ball Z wall art Leave a comment of your suggestion Category: 2D Art
A mounting plate to allow the chaotic lab cnc tap to bolt to the dragonburner v8 tool head
Dragon Ball Z wall art Leave a comment of your suggestion Category: 2D Art
I had to shorten the Dragonburner X-carriage mount after switching to Nadir's printed gantry parts. The original Dragonburner X-carriage mount was slightly too long, preventing the printer from homing correctly. So, here's the modified,…
This is my take on a Dragonborn Rogue. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #6 (0.56mm) swap to…
It combines Xol monolith carriage with dragonburner mount. For MGN12H block and 9mm belts. Added more screws to secure belt clips. WARNING: The middle screw should be the same level as the top and bottom screws; if not, the worst…
This is my take on a Dragonburn Ranger. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
The original design allows a lot of light bleed on lighter color shrouds. This design moves the LED back and adds a blocker over the diffuser to completely eliminate light bleed. An .stp file of the assembly is included so you can change…
I decided to try and implement extruder from my K1C into DB8 toolhead and I was successful! Compatibility - This adapter will work with any hotends made for K1 series including: K1 hotend K1C hotend Microswiss Flowtech Trianglelab's…
Remixed the Dragon burner to carry the Rook logo and remixed the Rapido HF mount to fit the TD6S. Dragonburner Mount it self is made by Gulsier. Dragon Burner Mount MGN9C for the Rook by Gulsifer | Download free STL model | Printables.com…
This a mount for the latest dragonburner to mount a tz-v6 hotend but with a standard v6 nozzle. The v6 nozzle causes the hotend to be 1.8mm longer so I just adjusted the dragon mount to allow for this change in length.
Dragonbane Core Set Organizer A set of two boxes to organize the components of Dragonbane Core Set. A bigger box with 4 compartments holds the standees and the dice. A smaller box with 2 compartments holds the cards. Each box has a…
This is my take on a Dragonborn Fighter. You might need to resize this model to fit your RPG needs. Due to the detailed nature of this model, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
Fancy having a Knomi Screen on your V0? This mod extends the dragon burner to support mounting the screen in front of the extruder. I only have a Sherpa Micro, so this is all that it has been tested with. The two power wires make use of…
Edit: added zero-g diffuser for the cowl with the logo. based on the voron diffuser, all measurements match. printed and tested, let me know if there's any issues and I'll fix asap.…
I shortened the Center Dock by 5mm, because my DragonBurner Toolhead with the integrated ZeroClick Mount didn't reach the parked probe fully.
THE 100 V1.1 DragonBurner Mount The x-axis becomes slightly smaller. (about 16mm) I'm using it a bit slowly. Outer wall - 150mm/s acc 5k inner wall - 250mm/s acc 20k Travel - 350mm/s acc 7k DragonBurner github…
DragonBurner toolhead braces are screwed into plastic for V0s build I don't have happy ending histories with screw into plastic. Instead, V0 does not use the heatinserts designed for 2.4/Trident probe mount so why not use it?? The…
Brick 35×35×0mm Floor Block
