G2SA/Orbiter filament sensor for Dragonburner V8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the Dragonburner V8 orbiter mount and the G2SA base to create 2 different filament sensor options for ERCF
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 284
- Wydruki
- 1
- Wyświetlenia
- 2150
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Upgrading my old CR10 v1 with the new Dragonburner v8 hotend and G2SA extruder. However I noticed a lack of filament sensor options for both, and I have just completed building my ERCF and needed a filament sensor for calibration. I chose to make the sensor integrated in its own component, so it can be used independently with different extruder setups.
I added a filament sensor within the Dragonburner v8 orbiter mount, to access the short segment between the extruder gears and the heatbreak, in order to use for ERCF. Uses a 5.5mm ball bearing and Omron D2f-01 microswitch
for those who aren't using the dragonburner hotend, I also created a G2SA bottom spacer to include the same filament sensor setup as above.