1 / 5
ENDER 3 NEO MGN12H DRAGONBURNER/MINI STEATHBURNER MOUNT WITH CR-TOUCH — zdjęcie 1
1 / 5

ENDER 3 NEO MGN12H DRAGONBURNER/MINI STEATHBURNER MOUNT WITH CR-TOUCH

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount compatible with dragon burner and mini stealthburner with cr touch included for ender 3 neo and others.

Ocena
0 / 5
Polubienia
92
Pobrania
514
Wydruki
0
Wyświetlenia
4152
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This mount is made to accept a dragonburner/mini stealthburne for ender 3 neo printer with linear rail in the x axis.

Print with minimum 4 wall and +40/50 infill you can go 100%.

Height of cr-touch can be changed when you want .

Made an assemblie in SW to check dimensions and mounted on my own printer.

you will need m3 screws (8mm;30/25mm) , m3 insert threads and m3 nuts of 2.2mm (slim).

Mini stealthburner or dragonburner can be found in github with BOM list and intructions (you need the screws from their bom list). 

Made this mount for my ender 3 neo normally should work to other printers in the same style.

You have to mirror the dragonburner mount in the x axis because i wanted at first the cr touch on the right side but had to change it because the x axis endstop.

probe offset -40x -7y

Print with abs.

Be free to modifie or improve this design.

Tagi