1 / 1
Dragonburner with cartograph and G2SA (Voron 2.4)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A combination of mods for the following combination - rapido - dragonburner - cartographer/beacon - EBB36 - G2SA
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 349
- Wydruki
- 2
- Wyświetlenia
- 3458
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (1)Kolekcje (92)Powiązane
I wanted to use the Dragonburner on my Voron 2.4 with galileo (G2SA), cartographer and EBB. I also wanted to keep the endstop, but didn't like the original huge pilar. The MGN12H carriage has a wireduct for the endstop and cartograph
I also added a small cable duct to the rapido mounting plate to make wiring the front led easier.
- M3 heatset inserts (default Voron spec)
- M3x12 SHC (probe bracket to the MGN12H carriage)
- M3x8 SHC or BHC (probe bracket to the MGN12H carriage)
- M3x8 (EBB bracket to carriage)
- M3x40 (instead of short bolts joining the motor to the G2SA)
- M3x8 SHC 2x (probe bracket to cowl)
- M3 square nut 3x
- M?x?self tapping screw
- … tiewraps
