Panel mount for Type-C PD 65w board no half hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified my panel mount design to fit a cheaper variant of CKCS U1E 65w module with no half holes
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Update 2026/08/11
Added slim profile for single mount and change screw position on dual mount to be compatible with this new slim profile model (meaning you can switch between them without drilling new holes)
====
Recently when buying CKCS U1E 65w module, I got these cheaper (copy) variant delivered which doesn't have half-hole mount point.
I've modified my panel mount design to fit it, which can be used for the original module too. You'll need to use either some zip-tie or screw to secure it as pictured.
For the dual mount, remember to cross wires as they are opposite to each other.