Liczymy pasujące modele…
This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…
Diseño realizado por mi, echo en fusion 360, funcional y actualmente lo uso para mi notebook ThinkPad lenovo T14. Design made by me, made in fusion 360, functional and currently I use it for my ThinkPad lenovo T14 notebook.
Whats needed to build this ? The 100W/65W DIY Power bank Modules typically available on Ali-express / e-bay etc. (Model : MYZL-YD24-2.32) 6x M3*4*5 mm Heat Set Inserts (installed on the Base to secure the Lid) 6x M3x8mm Flathead screws…
This is a simple mounting adapter designed to mount a Baseus 65W Battery to the dbrand Steam Deck Killswitch case. The battery is fitted to the mount using a simple friction fit and the mount attaches to the Killswitch using dbrand's…
https://www.aliexpress.com/item/1005005986842547.html
In addition to the 3D-Printed parts you will need the following: 4x M3 Heat-Set Insert (Short) 5x M2 Heat-Set Insert (Short) 4x M3x8mm Flat-Head-Screw 5x M2x5mm Flat-Head-Screw 2x USB-C PD 65W Modules 1x Makita battery adaptor 2 Pin…
The height of the case is designed to place 12 mm high radiators for better cooling of the chokes and PWM controller. If you want to use a board without a heatsink, the height of the case can be reduced in the slicer. Personally, I don't…
simple box for aliexpress module QC4.0 QC3.0 Type-C USB PD65W standard bare wire version
2026/01/26 update: Added dual stack mount to mount 2 module at once. Remember to cross the wires as the are mounted opposite with each others. ===== 2025/10/15 Update: A user asked for source Fusion360 file so I've added it. ===== I…
Some endcaps for the ThinkPads 65W charger to wind up the cables with and keep them tidy. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2 Infill: 20 Category: Organization
This cable wrap allows the USB-C cable to get neatly wrapped around the power brick. I would recommend to buy an angled IEC C7 cable like this one:…
I liked the idea of the original model, but it didn't fit for my smaller charger (65W) and the hinges “flipped” over. So I created my own variant in Fusion 360 (file attached). I printed the model with supports and 0.2 height. However,…
Update 11/3/23: Added a slot for a Logitech wireless mouse/keyboard USB dongle: “X1C Cable Reel with USB.3mf” Original: Cable management spool for a Lenovo 65W charger that came with a Think Pad X1 Carbon Gen10. I would bet that Lenovo…
Original model was very well designed, however I have reservations about having it completely enclosed with 65w output so I added vents to the top. Because of the added vents, its labels can no longer be on top so I also moved that to the…
Simple power module from cheap board less than $1 PD 65W . XT60 --> Usb-C https://youtu.be/TSSBQ88SkE8
Holder should fit any similar chargers with dimensions 109x47x30. The ones which are bundled with T14s and T490 fit. Mount it under the desk using two wood screews. Update : assymetric version 2 makes it easier to screw.
The original model featured a hole for a C7 Type connector (The one with only two pins) on one side. Because mine had an plug of the C5 Type (looks like an cloverleaf) it woudnt fit. I edited it so it fits for my plug. For this remix i…
Baseus USB C Ladegerät, 65W USB C Netzteil 4 Ports GaN Charger
A wall/desk mount for the Ugreen Nexode 65W 4-port USB charger based on the Ugreen Nexode 200W Wall/Desk Mount by dead1egs .
This model is a housing for a PD65W Fast Charging Module that has a type-C USB interface that supports PD3.1 QC3.0 SCP PPS Fast Charger 5V 9V 12V 20V and DC input voltages from 8 to 32v. The circuit module is like these:…
EN: The Prusa XL with 5 print heads has unused 24V terminals in the centre PSU for connecting the module. I have installed a car fuse holder ( Aliexpress Search ) with a 2A fuse, as this is sufficient for my USB devices. The CKCS board (…
A holder for Anker's slim 65W USB-A + USB-C power adapter. Can be mounted to a wall, under a shelf or whatever with double sided tape or via the two M2.5 screws. I had my power brick stuck to my bedside table with double sided tape for a…
Insert that fits into the deep part of the Rugged Pinecil XXL Case . It features mounts for a USB PD 65W 20Ah Battery from baseus and an Omnifixo. Model Link:…
I needed a holder to mount my power adapter (65W) of my Lenovo IdeaPad to under my desk. The holder allows for the power adapter to be removed and taken away if needed. The holder itself can be glued with double-sided adhesive tape to a…
Updated 05/22/2025 NOTE: There is another version of this adapter, before you print this, check out… https://www.printables.com/model/615935-usb-c-65w-charger-compatible-with-dual-ryobi-18v This printable adapter allows a single Ryobi 18v…
Hello, This is my first print. i was inspirered by Andrew and his https://www.prusaprinters.org/prints/1725-thinkpad-e580-stand Print instructions Printed in PLA
I wanted something to keep my charger out of my desktop table. This is a mount to be screw under a table/desktop, it places the charger in angle so I can see better which port I'm gonna connect. Not very convinced about that, but I have…
A case for 65W USB-C PD boards that take 8-30V DC input. The board I used is here (see picture below) https://amzn.eu/d/glfAvNE I used mine to make a custom power supply for a ZimaBlade to run from a router UPS with a 12V 3A DC barrel…
Updated 05/22/2025 NOTE: There is another version of this adapter, before you print this, check out… https://www.printables.com/model/448954-usb-c-65w-charger-compatible-with-ryobi-18v This printable adapter allows dual (or single) Ryobi…
2026/03/12 Update: Added v7 for newer, cheaper copies of the board without mounting recess. ===== This case was made for the base model of this U1E 65w Type-C PD board with solder points. It's a tight fit with the groove, so consider it…
I printed it in PETG, but should also be fine in PLA.
Enclosure for CKCS U1E 65W USB Type-C PD Module (XT60 Input) This enclosure is designed for the CKCS U1E 65W Type-C Power Delivery module , featuring power input via Amass XT60 connector . Purpose The primary goal of this design is to…
Overview This 3D printable fan shroud is a custom cooling solution designed to bridge the airflow from a Dell Micro CPU fan directly to an Nvidia Tesla P4. It is ideal for users turning their headless server GPUs into active-cooled gaming…
Cable tidy for the surface charger (65W). Easy to use, wrap the cables around your hand to form a loop, then slide the loops into the sections of the tidy. If you're looking for the 44W version (slightly smaller), you can find that here .…
Simple mount for the Anker desk charger.
A mount for Satechi 165W Charger to mount under a desk. Can be mounted with screws or double sided tape. It can be printed with PLA, but this charger heats up a bit under load, so PETG or even ASA/ABS is preffered. It can be printed…
I made this wall-mounted holder for mine the Lenovo ThinkPad Laptop 65W AC-DC adapter to organize the workspace and manage cables in the office. I printed it from PETG and used a 100% infill. Like what you see? Click an image below and…
Baseus 65W GaN Charger mount https://s.click.aliexpress.com/e/_DDM7u8V
Моделі корпусу фірмового павербанку нашого клубу робототехніки CyberConstructingClub. У основі лежить модуль павербанку 65/100W на мікросхемі IP5389 з двома type-c портами. У конкретній збірці використовується з'єднання 3s2p що дає…
This is a simple holder for the lenovo 65W power supply. Mine comes with the T14s. I mounted it under my desk. I have incorporated many cut-outs so that the heat can escape. There is a 2nd version without cutouts in the side because they…
I created this model to hold my Baseus 65w GaN charger under my desk so I can charge my phone, power my soldering iron and an extraction fan. The charger prints without support and in the orientation you would have it under your desk.…
This is a wall mount for "UGREEN Nexode 65W USB C" table charge device.
Just like the original model. print 2 The model is a snug fit around the adapter. Print Settings Printer Brand: Prusa MK3S+ Rafts: No Supports: No Resolution: .20 MM Speed Infill: 15% Material: Prusament ASA
This tool just can be screwed to the wall, which is especially usefull, if you supply a docking station with it and only need to take it out occasionally. This design also fits the newer lenovo PSU models with 95% efficiency, which are…
Fits for Anker 715 Nano II (65W version). Also there is space for the Anker 765 USB C 2m cable. Sliding lid holds everything in place, nice and tidy.
A mounting bracket for the Dell 65w HA65NM130 power supply. I designed this with Tinkercad to mount the power supply under my desk.
20220317 UPDATE: Step files now included. 20180116:MacBook charger cables break very easily, and the price for a new charger is high. Although there are replacement wires that can be bought cheap and installed, the design of the original…
A remix from the original to fit the Baseus 20k 65w ‘Elf’, PPJL65C, so the powerbank with attached cable. This is considered a good option for the Steam Deck! The fit is good, does not fall of, like the original poster. I like it very…
Baseus 65W GaN holder with clamp I used a Formlabs Form 3 for printing - works with Grey resin and Tough2000
We needed a way to secure our power adapters when used in a computer lab setting. The 65W power supplies are used for our student machines as well and we didn't want the ones in the labs to come up missing around computer collection day.…
Update 2026/08/11 Added slim profile for single mount and change screw position on dual mount to be compatible with this new slim profile model (meaning you can switch between them without drilling new holes) ==== Recently when buying…
This is a 30mm hole mount for a PD65W USB-C charger module. The circuit board is like one of these: https://www.amazon.com/dp/B0DGLMWV5J The mount consists of a mount, cap, nut, flange, tab and anchor. Printing with a layer height of…
I could not find a suitable model for mounting my 65W Lenovo charger to my desk with double-sided tape. I quickly modeled and printed this version and it seems to be working. I used brim and minimal support as shown in picture. It looks…
Model to mount the UGREEN Nexode 65W desktop charger under the desk. Fitment is a little bit loose. Printed with some polymaker PLA, standard 0.2mm profile on a P1S. No supports needed! .f3d .3mf and .stl is available to download
Der Powerbank-Holster für 65W Powerbank (154 65 27mm), seitlich am Gürtel eingehängt und da dann die Powerbank reingesteckt, macht das Tragen und Handling deutlich einfacher und bequemer. Category: Tool Holders & Boxes
My desk for experimenting with electronics is overfull and everything that I can move under the desk is a benefit. My small Lenovo laptop is sitting on a retractable surface under the desk, so its just natural to mount the PSU also…
how to print 3 models provided. The screw gaps have been calculated to match HSW's lattice. • vertical: device inserted from the top (recommended for a vertical wall mount) • horizontal: device inserted from a side • both/universal: holes…
I printed mine in 0.2mm, no supports with the orientation the model comes in. Thanks to Krutoo for doing most of the work for the 90W adapter!
*Before Printing make sure your power supply is about 47 x 106 x 28mm * Tired of stuffing what feels like a mile long cable into your computer bag? This wrap can help you keep you bag, or backpack nice and tidy. About the Print: No…
I designed this mount with Fusion 360. I wanted a practical mount for my desk. The power supply can be quickly removed if you ever want to take it with you. The mount is attached with 4 wood screws (hole diameter 3.4mm).
Remix of MisterEDs design to fit the 65w power brick.
The baseus 65W bricks with GAN are now everywhere, and for a reason. For roughly 20 bucks these just work and are incredible. I mounted 7 of these everywhere in the flat, to charge notebooks, Switch, Chromebook, phones, Steamdecks,…
Baseus 65W/100W mount on IKEA LACK furniture, will need to use supports
Whats needed to build this ? 100/65W PowerDelivery Powerbank module (Model : MYZL-YD24-2.32) 5x M3х4.5 Heat set inserts: 2pcs on top lid, 2pcs on top 4s2p holder and 1pcs on bottom 4s2p holder in center 5x M3x8mm flathead skews I soldered…
They are not meant to be friction fit, but the margin is like 0,1mm so might end up being one. In case you want to add them to something else. Should probably make one with extended wings or similar for drilling or whatever.
A simple support to mount your power supply in a lateral way and optimize the space. You can easily take out the power supply if you need it. Print 2 units to mount a power supply, as is showed in the pics.
Dell （model: Inspiron 15-3576）65W adapter cable organizer: stores and protects the power cord from wear and breakage, making it easy to organize. Help me replace filament and make updates, thank to tip me: PayPal me The organizer can both…
Two-piece housing for fast charging trigger
video: https://youtu.be/bqL0IYLaP-Q Additional materials: 1 inch nylon strap 70cm 2 pieces of velcro 5cm each sawing method Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20…
Printed with .6mm nozzle.
Description Desk or table mount for Baseus 100W/65W charger. The mount consists of: Charger mount Desk mount TPU pad to prevent slipping Screw pad to protect the desk Two screws, with a 5.2mm insert Screw caps Screw pads from the bottom,…
Baseus 65W charger holder for sticking to the wall, radiator, or any other place. You can easily remove the charger and take it with you on a trip, and after returning, put it back in the holder and enjoy the tidiness. Uchwyt ładowarki…
Under-desk or wall-mount bracket for an Asus 65W power supply - used for Asus TUF Gaming VG27WQ and others. I printed using PrusaSlicer's default slice profile, with the main span of the bracket on the build plate and supports under the…
Started as a remix, but ended up being a complete redesign. Needs M3 screws and M3 heated inserts in the bottom. Should fit any hole from 61mm to 69mm. Two options to mount. First put the charger in the base, screw the bottom on it. Then…
Support brackets for mounting the Baseus Desktop Charger under the desk. One of the two brackets has no locks and allows for mounting. You need to slide the charger into these brackets after screwing them to the desk.
**It should be noted that as of publishing this remix, I have not fully tested the model to make sure #10 pan head wood screws fit properly in the mounting holes or not. If not, I will either update the model or the description…
This is a vertical stand for the Satechi ST-UC165GM 165W 4-port USB-C Desktop Charger. I accidentally tossed the original stand that came with the charger and wanted something to hold it in vertical position on a flat surface such as a…
Printing Instructions Filiment Print in a durable slightly flexable filiment like PETG though PLA may be good enough Slicing print vertically back to the build plate no supports required V1 or V2 the differnce bettween V1 and V2 is the…
A case for the PD65W U1E Charger module. This is my very first attempt i'm a total noob with Fusion360. these tiny modules are awesome for fast charging PPS, PD2-3, QC3-4 and loads of other standards. it uses the DC barrel Jack for an old…
This is a cap for the Dell 65W charging blocks. The awful moulded design means the cables fall to bits, snap etc making them unsafe. Great for a corporate env where thousands of people work as these chargers are around 25quid each, so for…
Made this mount to attach my USB charging station to a coffee table next to my sofa. Fits the charger perfectly. Added a small lip at the opening of the slot to keep the charger from sliding out. Requires 2 screws to mount.
Designed for 4mm screws, printed on my Prusa Mini+ with Revo Hotend using 0.4mm nozzle and 3DJakes ecoPLA.
This is a holder for the Baseus 65w 20Ah Powerbank on the IKEA Skadis pegboard. This holder has extra large cutouts, so the Powerbank could be inserted in both directions and the Cables and the Button are useable.
I needed an easy way to keep a USB charger near my camera when it's on a tripod so I can keep it charged while doing longer video shoots or timelapses. I found that the 65w Anker 735 was a nice little charging cube that allows to for…
Soldering station for Baseus 65W charger and USB C powered soldering iron. Prints with no support Holder uses 608 bearing, M3 Nut and Bolt. (Would suggest 6900 bearing for TS80). M3 nut and screw Print vertically (as shown in the picture)
This holder keeps a UGREEN Nexode X 65W charger (Euro Plug version) neatly tucked in the middle of a cable organizer. There are two slots to push the USB-C plugs through, so the cable keeps tidy without the need for an elastic band or…
I bought this battery for my film equipment, and it's amazing. It is capable of multiple voltage outputs simultaniuosly. It can power my wireless mic reciever (5v), my camera, (7.5v) and my external monitor (12v) all at the same time.…
Add a unique character to your charger and gain additional protection, recommended PLA print, fits perfectly tightly
Combine 65W charger with 6000mAh power bank back to back. 酷科 65W 饼干 + 6000mAh 移动电源背靠背。
I needed something to represent the charger when doing boolean operations for holders and such so I created this. I haven't tested yet though. The rear part where USB C connects is not 100% correct for sure. Should be good enough for…
This just allows to keep the Lenovo USB-C Powered Travel Hub and the 65W Lenovo USB-C power brick in a single enclosure. In addition to this, the added weight from the power brick makes the hub more stable. As a drawback, the design hides…
Dell 65W power adapter, fits other adapter as well (HP for instance). Has two brackets on the sides for organizing power wires independently.
Mount for UGREEN SKU 70774. Also called UGREEN 65W USB C PD Charger - 4 Ports. Used a extension cord to have it on the back of a night stand. For my use I printed it in 0.2 speed on my MK4 with PETG. Vertical shells perimeters set to 2…
English: Since I couldn’t find a suitable case on any of the common platforms, I decided to design one myself – as best as I could. I printed the case using TPU. It’s designed to slide over the power bank and then snap into place…
A mount for Baseus 65W USB-C charger inside a Niko blank faceplate. It's too large to fit in a standard wall outlet, but with some imagination it's still usable in other places. I've printed it with the front on the buildplate. You could…
Protective Shell for the 2023 65W USB-C Laptop charger This charger came with my Yoga 16ARP8 laptop and since I don't like my chargers to be all scratched I made this shell. The charger itself likes to heat up (like any charger I guess)…
Compact Travel Case for Anker 735 Charger (Nano II 65W) I’m excited to share my latest project: a travel case for the Anker 735 Charger (Nano II 65W) ! The case is made up of two parts: Inner section : Designed to be printed in TPU,…
G3061 PD65W mini hot plate bottom plate Installation Requires 4 m3 screws and 1 cm diameter rubber feet.
Model to mount the UGREEN GaN 5-in-1 65W desktop charger under the desk
Simple stand that slides on to the Baseus 65w battery leveraging the weight of the battery to keep the stand in place. Helps reduce device and cord clutter while taking up minimal tabletop space making this ideal for an airplane or other…
![[UPDATED] Lenovo 65W 2023 Charger USB-C Shell](https://media.printables.com/media/prints/967068/images/8055936_ef0239fc-53e2-4383-ad7e-b5409e00f7a5_af93a478-26dc-4f01-ad0f-6219b3a8dc8b/20241106_091549.jpg)
