1 / 1
Makita 18V USB-C PD Charger (2x65W)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makita 18V USB-C PD Charger (2x65W)
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 279
- Wydruki
- 2
- Wyświetlenia
- 1840
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 17)Remiksy (1)Kolekcje (62)Powiązane
In addition to the 3D-Printed parts you will need the following:
- 4x M3 Heat-Set Insert (Short)
- 5x M2 Heat-Set Insert (Short)
- 4x M3x8mm Flat-Head-Screw
- 5x M2x5mm Flat-Head-Screw
- 2x USB-C PD 65W Modules
- 1x Makita battery adaptor 2 Pin version (the low voltage protection wont work with 3 pin version!!!)
- 1x Power Switch 15x21 (Optional)
- 1x 2mm Flat Tower-LED + current limiting Resistor and/or DC-DC Step Down Modul (Optional)
USB-C PD 65W Modul from Aliexpress:
65W 8~30V DC to USB Type C PD 3.1 QC3 Fast Charge Step-Down Power Module Mobile Phone Quick Charge Adapter
DC-DC Step down modul:
Wiring sheme:

