1 / 2
PowerColor RX 9070 XT Reaper Ghost S1 Shroud – Bottom Connector Mod — zdjęcie 1
1 / 2

PowerColor RX 9070 XT Reaper Ghost S1 Shroud – Bottom Connector Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Modification of Smallr's 9070XT Shroud designed to fit in the Ghost S1

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
494
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Overview

This is a remix of the bottom connector (bot) from the original PowerColor RX 9070 XT Reaper Custom GPU Shroud.

The remix is intended specifically for builders using a LOUQE Ghost S1, where the original bottom connector can interfere with the case during installation.

What Changed

Only the bottom connector has been modified.

Material has been removed from the connector around the locking section to provide additional clearance inside the Ghost S1 while retaining compatibility with the original shroud.

No other parts have been changed. Simply replace the original bot STL with this one and use all remaining files from the original model.

Note

Because part of the locking tab’s guide track has been removed to achieve the required clearance, the locking tab does not fit as tightly as it does in the original design. In my testing, it still functions correctly and securely retains the shroud once installed, but it does have a small amount of additional play compared to the original part.

Compatibility

Tested with:

  • PowerColor Radeon RX 9070 XT Reaper

  • LOUQE Ghost S1

  • Original custom shroud by the original designer

Printing

Successfully printed on a Bambu Lab A1 using PETG HF at a 0.20 mm layer height.

Credits

A huge thank you to Smallr for creating this excellent shroud. This remix simply adapts the bottom connector for the tighter clearances found in the Ghost S1.

Tagi