Capella - Antweight Vertical Spinner Combat Robot - 1lb 3D printed robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A (mostly) 3D-printed combat robot design for the 1lb weight class.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
My speedbuild spare parts ant vert, competed under the name Capella. It got 4th and then 3rd at a local combat robotics event.
Everything is printed out of TPU except for uprights (high speed TPU) and the top plates (PLA+ or carbon fiber). It did pretty well, the main thing to keep in mind is to have a shaft collar on the motor shaft where it sticks out of the upright so the two uprights are structurally tied together. Use this as reference or you can build it i dont care
Please be safe! If you build this don't spin up the weapon outside of an enclosed test box or arena. I am not responsible for what happens to you. This is not a beginner robot design.
There are configurations for TPU top armor, flap forks, and a long fork. Most things are mounted with #4 or #6 plastites or M3 screws.