1981-84 Kawasaki kz550 clutch basket removal tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With inspiration from a ducati tool, I drew this one for the kawasaki in freecad.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In trying to pull the clutch basket off the kz550 because AI said it had to come off to get to the shift shaft (it didn't), I first downloaded and printed one for a ducati (here) to see how it worked and then dimensioned my clutch system and using freecad, drew one from scratch. My CAD skills are entry level and constraining the teeth on the inner radius ended up being a free-for-all, but it worked. Took about 2 hours to print on and ender3 KE and worked fine using PLA with 5 layer shell and 50% infill.
The two bolt holes on the outer radius are not needed. With a 30 mm socket on the impact, I held the tool by hand and the nut came loose pretty easily with a couple triggers from the impact wrench.