Tweezers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print pair of tweezers
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Easy to print tweezers! Only 2.72 grams of filament, 30m printing time.
The end of the tweezers have a small bump to make grabbing a specific thing much easier.
Orientation: must be printed vertically from the base of the handle.
Print parallel to X axis to reduce bed movement
Picture of slicer is attached.
X: 90 degrees
Y: 2.50 degrees
Z: 0 degrees
Supports are needed at the base to stabilize during printing, I recommend painting the round part of the handle with supports. Picture of slicer is attached.
Print 0% infill, .2 mm layer height, 2 walls
No infill is needed because the base of the hinge doesn't need any and the rest of the tweezers are filled in by the walls