Tweezers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print pair of tweezers
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Easy to print tweezers! Only 2.72 grams of filament, 30m printing time.
The end of the tweezers have a small bump to make grabbing a specific thing much easier.
Orientation: must be printed vertically from the base of the handle.
Print parallel to X axis to reduce bed movement
Picture of slicer is attached.
X: 90 degrees
Y: 2.50 degrees
Z: 0 degrees
Supports are needed at the base to stabilize during printing, I recommend painting the round part of the handle with supports. Picture of slicer is attached.
Print 0% infill, .2 mm layer height, 2 walls
No infill is needed because the base of the hinge doesn't need any and the rest of the tweezers are filled in by the walls