Search results: pliers

Pense - Pliers

Pense

Wall Mountable Pliers Holder - smaller

This is a simple version for a pliers holder that can be mounted on the wall. The holes from the original design are still there but it can be mounted using good quality double sided tape and it should support the weight correctly.

Pliers holder for Prusa enclosure

This was printed in ASA but you can use whatever you like.

Pliers organizer

A simple organizer for small-sized pliers. size 97*90*60 mm section width 17 mm

Peggit - Large Pliers Holder

Introduction The Peggit system is a simple way to attach holders and organizers to your pegboard using simple automotive rivets. The clip easily attaches to standard pegboard with 1" spacing using 15mm x 12mm x 6mm automotive push rivets.…

Pocket Pliers W (print in place)

Discover the ultimate mini water pump pliers for your pocket! This tool, with its practical print-in-place design, is only 80mm small and fits in any pocket. The model can be printed on my printer without support. However, on other…

Wall holders for Knipex Pliers wrench 86 03 180 and Cobra 250

Two separate holders for Knipex tools - the pliers wrench 180, which is probably my most used tool, and the old trusty Cobra 250. The Cobra holder does not hold the pliers completely vertical, which still could be optimized. It is however…

Gridfinity pliers and nippers rack - Smaller Versions (1x4 & 2x4)

Remix of Some Guy 384763’s plier rack design Smaller gridfinity versions of the horizontal plier holder: Available in 1×4 (2 pliers) and 2×4 (4 pliers) formats. Slot width: 17.75 mm (1×4) and 18.375 mm (2×4) . Still fits into the shorter…

Running Pliers - REMIX - TPU Round Nose Adapters for Glass Cutting

Designed for 95A Shore TPU (eg the excellent Eryone TPU, I have that in clear and black now) 0.4mm nozzle, 0.2mm layers, 4 walls and 100% infill. I also use a 2-line brim but spaced 0.5mm from the model ("brim distance", in Cura) so it…

Gridfinity Tray for Cleco Pliers (Single)

This is a follow on to my earlier Gridfinity holder for cleco pliers . I was a little disappointed that holder wouldn't fit one of my cleco pliers, but in order to get both sets of pliers to fit in 1x5 squares, there was no extra room to…

Pliers holder

Pliers holder for honeycomb wall system. Available in two versions with 40 mm and 35 mm pitch . Printed of PETG, infil 15%, Perimeters 2

Filament Pliers Handle Repair

Need repair of your pliers handles ? Try these. Simple printing without supports.

Gridfinity Crescent Mini Cutters & Needle-Nose Pliers Set Holder

Model is designed to be paused, or use of a 2+ nozzle printer to add colored accent to bossed edges.

Multiboard Mount for Pliers

I had some pliers on my desk and I wanted them not on my desk.

Wide Pliers Holder – Honeycomb Storage Wall

This wide pliers holder is designed for pliers with large or widely spaced handles. It is suitable for various plier types such as combination pliers or water pump pliers and provides organized wall storage using the Honeycomb Storage…

Skadis T-Nut Pliers Holder

Holds up to 4 smallish pliers. Handle hole diameter 20mm. Prints in provided orientation. Designed for M3 screw, with 6.5mm counterbore for screw head. I used these M3 printed thread T-Nuts: Skadis T-nut mounting system, threaded for M3…

Hydraulic pliers (Hydraulické kliešte)

Model použiteľný pre výučbu fyziky na základných školách. Vysvetľuje funkciu hydrauliky a nestlačiteľnosti kvapalín a ich aplikácie v strojárstve či priemysle. K finalizácii potrebujete ešte zopár skrutiek, matiek a podložiek a podkladovú…

Pliers holder

A holder to hang your pliers on the edge of the desk

Tool holder for Knipex crimping pliers on IKEA Skådis (Skadis)

This is a recreation and remix based heavily on Spookniks tool holder for Knipex crimping pliers for IKEA Skådis (or Skadis for those not writing with the diacritic ring). The original only had room for one tool and it felt a bit sloppy…

openGrid - Flush cutter / snips / pliers holder

Remixed this simple and effective tool holder to fit openGrid. Works with a variety of common flush cutters. The regular one works perfectly with my cheapo cutters from Amazon, but I also remixed the narrow version in case yours are…

Pliers / Wrench Gridfinity Bin

Pliers / Wrench Gridfinity Bin 3x7. Two parts with a dovetail in the middle to connect them. They'll fit crescent/adjustable wrenches, pliers, etc. In my picture for example, from left to right is: (Knipex 87 01 180), (Knipex 86 01 180),…

Wall mount for Knipex Pliers Wrench XS (86 04 100)

Hang your tiny pliers wrench on any surface! Printed using PETG, no supports.

Low Profile Pliers Rack

This will hold four small hand pliers on their side for drawers that are 3" (76mm) high. The rack itself is 66mm high. There are a bunch of racks out there but I didn't see any meant for short toolbox drawers that compress the pliers to…

Elastic Pliers / Tweasers / Foreceps

Just a quick tool to make placing elastics easier Kinda like circlip pliers I've found the small 'braces' orthodontal elastics are cheap and quite useful for the types of mechanisms I like to design But they are fiddly to insert/route…

Creality K1C pliers holder

Creality K1C pliers holder Printer clip holder

Gripper / Gripping pliers- no screws or glue needed.

Gripper to use for whatever you want :) Assambly without glue and screws. PRINT PART FEDER FROM TPU/FLEX MATERIAL

OpenGrid Pliers / Wire Cutter Mount

A simple, openGrid compatible mount & holder for wire cutters and pliers that slides on to two multi-connect slots. Can be printed standing up without supports

Knipex Pliers Wrench Screw-in Wall Mount (86 05 250)

Attach your Knipex Pliers Wrench to any surface! Printed in PETG with no supports. Use 4mm countersunk screws.

No-Drill Pliers Holder | Hot Glue Mount Tool Organizer

No-Drill Pliers Holder | Hot Glue Mount Tool Organizer This is a simple and practical pliers holder designed to keep your tools organized and easily accessible. The holder can be mounted inside a cabinet, on a wall, or in a workshop area…

NON-MARRING PLIERS

Designed in fusion 360. Files are in proper printing position. Print all one color with the full assembly file or print both arms and press pin separate for 2 different colors. Pin is a press fit so ensure proper position then hammer…

Knipex Mini Pliers Gridfinity

Knipex Mini Pliers Gridfinity bin 2x3. Fits Knipex 4" Pliers Wrench XS (86 04 100) and Knipex Cobra XS Water Pump Pliers (87 00 100) nested on top of each other. You can put either one on top or bottom.

Needle Nose Pliers, Spring loaded, Version 3, Print in place

Recommend printing in PLA with at least 30% infill for structural strength.

Prusa Pliers Cap

A simple design to help keep those pliers closed. It helps it to take less space, for example if put them in the Side Storage . 2 versions available : open or closed. Printed those in PETG, think they would be perfect in TPU. They snap…

Knipex Pliers Holder for openGrid

This was inspired by (but not remixed from) There is about 29mm between the two posts and my Knipex Cobra Pliers 87 02 250 fit perfectly. It should also fit the 87 01 250 pliers as well. Connects to openGrid using the openConnect snap…

Gridfinity Knipex Snipe Nose Side Cutting Pliers - 26 12 200

Gridfinity bin 2 x 6 x 4 for Knipex 26 12 200 needle nose pliers

Gridfinity Knipex Combination Pliers - 03 02 180

Gridfinity bin 2 x 5 x 4 for Knipex Combination Pliers - 03 02 180

Irwin 9.5" Lineman Pliers Gridfinity

Irwin 9.5" Lineman Pliers Gridfinity bin 2x7. Dove tail in the middle so it'll fit on the print bed.

Pliers Rack

X1C bed can fit 4 of those in one print

Micro plier holder (Works with Prusa pliers)

A very simple holder to store micro pliers. Designed it to fit the pliers that came with my Core One L Uses 2 button screws ( 8g, 10mm head, 4mm screw diameter)

Wiha pliers Z341A1101 gridfinity box

Made with https://Tooltrace.ai . In height 8.

quick print pliers

these pliers actually works and it is a very quick print and easy to ude

Gridfinity Pliers That Use Less Filament Than Others

I wanted to make my own design for standard PCAFC Pliers. There are many more online, but they all seemed to have useless filament waste all they way to the top in the middle of the plier"s handles. I decided to change that once and for…

Mastercraft Pliers set gridfinity organizers

gridfinity holders for mastercraft pliers and side cutters from this kit https://www.canadiantire.ca/en/pdp/mastercraft-comfort-grip-pliers-set-micro-chrome-finish-8-in-3-pc-0584785p.html?rq=pliers sidecutter model # 58-4587-4 needlenose…

Gedore Grip Pliers Gridfinity

Maybe youve to print the Inlay first to check the size for your Pliers. I testet it for a few grip pliers

pliers holder for HOLZMANN table

pliers holder and one screwdriver for HOLZMANN maybe CRAFTMAKER table

Gridfinity Pliers Wrack (Small)

A 4x4 station to hold up to 6 pliers, wrenches, or ratchets. Slots were made wide to allow for thick-handled tools. Base based on Zack Freedman's Gridfinity "Templates.f3d" file. If you like this design then click here to check out my…

Honeycomb Wall snips or pliers holder DOUBLE!

New, Screw Wall, much stronger than the Honeycomb Wall https://www.printables.com/model/544779-screw-wall Honeycomb Wall Cutter DOUBLE! If you want the single version please see my other Honeycomb Wall STLs I have made several see below…

IKEA SKÅDIS / SKADIS Pliers holder

This Pliers holder for the Ikea Skadis board is easy to print and uses special pegs that I have designed. These can be found here: Skadis/ SKÅDIS universal short peg The reason for a separate peg from the organizers is that it enables you…

SKADIS Pliers Holder

Pliers holder for IKEA SKADIS. ------ I printed with these settings: Resolution: 0.2 Supports: No Infill: 20% (Cubic) Rafts: Skirt Filament: Prusament PETG Signal White / Prusa Orange ------ Check out my other SKADIS accessories to create…

gridfinity wedge pliers organizer.

cheap, low filament, low complexity organizer for gridfinity system. Wedges can be used for pliers and square-shaped things.adapted from Zack Freedmans gridifinty system. A lot of my plies would take up one and half grids and appalled by…

Pliers holder "Big" for "Tool Storage Systems - Brunos"

This storage system for big small pliers or other tools has space for up to 4 parts and its an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. I have made also a holder for small…

Cutting pliers holder for Ikea Skadis

Voici un support en 2 parties qui est simple à imprimer pour 2 pinces coupantes. Il s'adapte aux plaques ikea Skadis.

Honeycomb hook Cutting Pliers

"Hook" for the Cutting Pliers . Single easy to print part. Need nest

Pliers holder mounted with screws

This is a remix of the original holder. Which allows you to hang it with 3mm or 3.5mm screws.

clippers/pliers holder

Simple clipper/pliers holder that you can attach to the wall or a cupboard

Multiboard Scissor and Pliers Holders

I liked the original design for the Pegboard Pliers holder but wanted to adapt it to work with my multiboard. Only printed one of the 3 designs, but was easy enough to add all of them for whatever you are looking for. FYI: The connector…

Pliers (Print in place)

★·.··.·★ 👋 Hello😁 ★·.··.·★ Before reading the description I recommend in the future to look at the collections created by me for better service for high projects is to distinguish them better 💚MAKERWORLD→ COLLECTIONS there is nowhere a…

Crimper pliers box

I have printed from PETG. The wall is thin to fast it print. If your pliers has different dimensions or want thicker walls you can change the Fusion 360 model.

Pliers holder / Držák kleští Parkside

Co potřebujete? Pro Basic: 3X 15cm závitovou tyč M8, 12Ks krátkých matek M8 a 2Ks držáku Pro Pro: 3X 15cm závitovou tyč M8, 30ks krátkých matek M8 a 5Ks držáku

Scheppach HSW for pliers TB150

TB150 HSW pliers mount Update: 21.07.2024 made the arms wider to fit the other pliers

Gridfinity Knipex 3125160 needle nose pliers needle nose pliers Greifzange

Knipex 3125160 needle nose pliers needle nose pliers Greifzange. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670

HSW Scissors or Pliers Holder

Holder to mount scissors or pliers to Honeycomb Storage Wall. Designed to fit with the original inserts and covers for a nice look. Based on the original “box” design from HSW. I made 2 versions so you can use either M4 or empty inserts.…

Speedwire and pliers stand for laser welder

This is a holder for laser welder tools like speedwire (a wire dispencer for holding silver or gold wire), a marker, tweezers and pliers.

Zangen / pliers

Ich habe diverse Zangen konstruiert und bereitgestellt. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 50 % **Filament:** any PLA+ Notes: Zusätzliches Material / additional material Schraube / screw M4 Mutter / nut /…

Holder for Universal Pliers and Screwdriveers

Needed a Generic Holder for my Generic Pliers that could be screwed into my printer desk. Added a screwdriver holder for good measure. Print Settings Printer: Anet A8 Rafts: Doesn't Matter **Supports:** Yes Resolution: 0.1 mm **Infill:**…

Pliers Gridfinity

Pliers can be a challenge as the smaller ones like to pop up, so I designed this to hold them closed. I've included the open one without a top as well, for those well behaving pliers!

Pliers holder for Honeycomb Storage Wall

Wall pliers holder

I designed a pliers holder for the wall. We connect the wall holder with the screwdrivers holder. We will use M4x20 screws and M4 nuts for connecting. The counter piece of the holder is installed on the wall using 4x30 wood screws, which…

Pliers - 3D printable tool

📢 Grab your 3DNYLON filament and adhesive pack at www.3dlac.com and enjoy easier and more precise 3D prints 💪 --- These fully 3D printable pliers are designed to be easy to print and have a print in place design. They're support-free and…

Creality pliers handle cover replacement

i scanned one of my covers and made a replica stl file. i used tpu, but im sure pla would work fine, frankly i havent tested it at the time of this post. using tpu it should need any supports, however pla might differ.

best pliers

This pliers are the best pliers in the world like it is written on the handle. I tried many different versions, what u can see here in the Youtube Video: You can print the nut and the screw by yourself or just use a metal one (M6) In the…

Screwdriver and pliers hanger for modular Snap Tool Rack

To be used with Snap Tool Rack wallmount blocks (STR-001 and STR-001B). Step file also available for easier modification

Gridfinity Nippers Pliers Strippers Rack 2x2

A rack that fits a set of thin Knipex electronics pliers and 3 Knipex comfort grip small pliers. Prints without supports.

Pliers case

Case for pliers with belt holder

Pliers holder

Pliers holder

Riveting pliers - Riveting gun - Nietpistole - Nietzange Box

A simple box for a rivet gun with small compartments for storing rivets. The lid is mounted by inserting a small piece of filament. This creates a functioning hinge. This is for bigger printers. Maybe you can cut it in half to be print on…

Basic pliers organizer

This is a very simple stand / separator for tools which keeps them partially vertical in a drawer to save space.

Skadis - Knipex Pliers - Electronic Super Knips - T-Nut Edition

Holder for the Knipex Pliers

HSW Locking Pliers Support

Securely holds locking pliers within the Honey Comb Storage Wall Print suggestion: height: 0.2mm fill: 15%

Chinese Cutting Pliers Angle 45 Degree Blade Stop

This is a replacement blade stop for the Chinese Cutting Pliers Angle 45 Degree Thank you for every review, like and donation, It motivates and helps to implement new projects! Print Settings Printer Brand: Creality Printer: Ender 3 Pro…

French Cleat pliers holder

This is a simple but effective holder for pliers and other stuff that you can hang onto a rod for your french cleat wall. Additional Parts: 12,5 cm M5 threaded rod Print instructions: print in orientation shown in picture. 3 or more…

Pixel Snap/Push Pliers Square Node Adapter

Use with Boscoyo's Pixel Snap/Push Pliers 2.1: https://boscoyostudio.com/products/pixel-snap-push-pliers-2-1 The 3mf file has my preferred orientations and organic supports enabled. The force on it is mostly compression so I think PLA…

Minimalistic holder for pliers

My pliers have seen too much... so they well deserved a place to rest. No supports minimal design for hanging them on the pre-holed wall.

Gridfinity Channellock 430 10" Pump Pliers

Exported in 2 parts for smaller printers, the internal pegs are optionals, but if you want to print them scale them down a bit so they fit. there is no fit tolerance on them.

Long Reach Pliers - No Hardware required

3D printed long reach pliers V4. The pliers are designed by me and a remix of a model that I posted. The earlier model required an M3 bolt and nut, this one has a "twist and lock" d esign Print instructions infill I printed with 20%…

Pliers Organizer

Nothing fancy here, I print this at 15% infill, 3 each perimeters, top layers, and bottom layers. Standard layer height of 0.2mm. It needs no support or intervention of any kind.

Locking pliers multiboard holder

A multiboard holder for locking pliers. My pliers have an M12 screw so this is the size it can fit. It locks into the multiboard using two 13mm small thread, flat head t-bolts. I printed it in PLA at 20% infill. Bambu Lab Matte Ash Gray…

Basil Stem Stripper Pliers

After making a basil seed separator/thresher to speed up the process of separating the seeds from the husks, I started wearing my hands raw striping the stalks to keep up with it... Soooo, now I made this thing. It operates like a pair of…

Pliers For Φ8mm Only

Considering strength, please change the filament. Print Settings Rafts: No Supports: No Infill: 20 Filament: PolyMaker PLA Post-Printing Category: Hand Tools

Knipex VDE Pliers Holder Skadis

no support needed brim helps with adhesion problems

Knipex Pliers Wrench Holder for Skadis

no support needed brim helps with adhesion problems tested in PETG-HF

FoldX - Foldable Multi-Tool - Mini Pliers Tool-head

FOLDX - Foldable Multi-Tool - Mini Pliers Tool-head Foldx is a 3d printable foldable multi-tool inspired in the swiss army knifes. You can mix different parts of this kits to make your own every day carry foldable tool. You can find the…

Knipex Pliers Wrench jaw covers

These are a set of protective soft jaws for the smallest Knipex Pliers Wrench (model number 86 03 125). If you work on delicate items such as electronics you can use these jaw covers to protect whatever you are working on. These jaw…

Wera 2go 4 pliers insert

This is a remix of the 'Customisable Organiser' by DarraghB, which can be found here. This is an insert I have sized to work with the Wera 2go 4 tool quiver. It has 2 rows of 3 columns, with a total of 6 slots, I have chosen this to suit…

Print In Place Pliers

Easy to print pliers, I designed this because I seem to always be looking for a set of pliers. Tolerances needed: 0.3-0.4mm Printer Settings: Layer Height: 0.2mm Infill: 40% or higher Walls: 4 Feel free to let me know if you have any…

Pegboard organizer for pliers

Needed somewhere to put my pliers. Made for pegboard with 12x12 mm holes

IKEA Skadis - T-Clip System - Pliers Hanger

Fits one set of pliers. Prints without supports. Uses full-size T-Clips . Designed in OnShape .

Pense - Pliers

Pense

Wall Mount for ICON 59167 Needle Nose Pliers

A slightly scaled up version to accommodate the 8in HF needle nose pliers. Works with either double sided tape(seen here) or a screw! Cheers, thanks for looking!

Wall Mountable Pliers Holder - smaller

This is a simple version for a pliers holder that can be mounted on the wall. The holes from the original design are still there but it can be mounted using good quality double sided tape and it should support the weight correctly.