Pixel Snap/Push Pliers Square Node Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: SqNode Pixel Pliers Adapter_0.4n_0.2mm_PLA_MK4IS_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 10.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapts the best pixel pushing tools to work with square nodes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Use with Boscoyo's Pixel Snap/Push Pliers 2.1: https://boscoyostudio.com/products/pixel-snap-push-pliers-2-1
The 3mf file has my preferred orientations and organic supports enabled. The force on it is mostly compression so I think PLA won't have any issues in the long run, but it won't hurt to print in something tougher.
Use an M4 12mm (or longer) socket head screw and nut to attach to the forked side of the pliers.
The pliers are a hand made tool with inconsistent bends and alignment so this probably won't fit perfectly. I have multiple sets and the fit is less clean on some, but they have all worked for me, YMMV.