Long Reach Pliers - No Hardware required
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hartmann Micro forceps (Long reach pliers) based on the medical pliers that are used to extract foreign objects.
- Rating
- 4.8 / 5
- Likes
- 267
- Downloads
- 633
- Makes
- 4
- Views
- 3,164
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
3D printed long reach pliers V4. The pliers are designed by me and a remix of a model that I posted. The earlier model required an M3 bolt and nut, this one has a "twist and lock" design
Print instructions
infill
I printed with 20% infill. The only part that needs 100% infill is the moving handle (with cam) up past the hinge hole. (I had the cam snap off on one of the pliers.)
Supports
I used the option to add support material on buildplate only. This should ensure that the holes stay open
Orientation
The models are not correctly oriented for printing.
Best Orientation of the top part for printing is to have the v-grove pointing up
Best orientation for the base is flat on it’s side with the logo pointing up
Best orientation for the jaw is with the cam and teeth pointing up
Best orientation for the separate handle is flat on its side, with the little cam pointing up. The other way around would require a lot of extra support material.
All the parts should fit on a 200x200mm printbed.