Counting matching models…
This thing spirals long distances like nobody's business and flies with ghost-like movement! I have made a major update… a TWISTY update if you will ! 🌀 Please, check out the video above. Every throw is around 50 to 60 yards plus! ↪…
Print approx. €6.29–€7.69 excl. taxPreliminary estimate for one variant
Have fun with this longitudinal fidget ring! It spins only a few times until it stops. Then you need to spin it in the opposite direction. I uploaded many sizes (inner diameter in mm from 12.3mm for kids to 24mm for big fingers, please…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
Hello there! Unfortunately, the centralization of Bitcoin mining continues to increase. But Bitcoin is for everyone! Especially for small people like you and me, Bitcoin offers the opportunity to break out of the system and gain financial…
Print approx. €6.36–€7.77 excl. taxPreliminary estimate for PETGSource material: PET
Used: Voxalabs Aquila eSUN PLA+ Black 0.2mm layer height 25% infill, more the better really. Used ironing so get a smoother surface, but unsure if this is really needed.
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
Extension for the Delonghi Eletta Explore. The extension has small hooks and thus holds securely. However, I recommend an additional extra attachment with tape (no one wants to pick up all the beans from the floor ;) ). No support…
Print approx. €5.34–€6.52 excl. taxPreliminary estimate for one variant
A very long vortex tube with spinning ball. Printed to the height limits of the Prusa MK4. No supports needed for the tube, only a brim. Supports needed for the ball. Lower the print speed to 70- 60% for the top third of the vortex tube.…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
I needed a shelf to hold my 1m level and long ruler in the garage, so I quickly modelled these C-shape brackets to do the job. For my purpose, I used 3 of them, but more or less would work just as well. They are strong enough when printed…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
The model was elongated to the same length as the remix by Ernesi to use his remixed side supports. It uses a separately modeled solid bottom which should be printed with grid infill and zero bottom and top layers. This replaces the hex…
Print approx. €4.53–€5.53 excl. taxPreliminary estimate for one variant
Elongated pentagonal bipyramid.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
I'm very excited to introduce you to the new and extra long Glorious Baby Dragon! Longer Dragon = more Fun! It has so many articulated parts, so amazing! Length: 93cm / 36,6Inch Luckily, I arranged the parts to use as little printing area…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
Info: I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place bent tail & fingers allow: much longer tail (tail has 41 particles, instead of 11…
Functional lock picks with robustified hook design. 1mm or 0.7 mm hook thickness Short hook is more rigid and functions better than Medium hook. Print with 5 walls/100% infill Use stiffer materials such as PLA, PLA-CF. ABS or PETG are…
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
Follow me on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ Pinterest ❤ Haku (Miyazaki) 🐲 Commercial License Do you want to sell prints of my models? You can purchase commercial licensing by joining the Commercial License in my…
With this rail track, you layout is not limited by the standard shapes. It's also great to overcome small bumps, such as the edge of a carpet. Compatible with Brio, Ikea Lillabo and Playtive tracks Print-in-place without supports If you…
Please checkout my other free designs at https://makerworld.com/en/@Westly Description Attached you will find several card storage dividers that fit standard BCW long boxes, Multi row boxes, and MTG Fat Packs / Pokemon Elite Trainer…
How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…
I own a DeLonghi Magnifica Evo and let's be honnest, if the coffe is delighting, the coffee bean container is so small you can't put more than 250 or 300g. And you always have to manage half a packet beside the machine, because you just…
When I started printing face shields, I wanted to use larger (4kg) spools. Since the Prusa MINI spool holder is very good, but the lower rails were too short I modified them (now they are 15mm longer). Here you can get the original STL…
This model is compatible with the lego system.
The grip is printed in two parts and clamps around the rail on the Longshot like the original grip. Printed without supports. Hardware: 3x M3x8 socket head screws
A ZenitCo RK-2 "clone" with 2 different mounts. Print with more perimeters, the more the better. The CAP for Mount1 Fits both mount types! Contact me for commercial use. AIRSOFT ONLY! Not for real firearms!
This is a battery holder for Einhell 18V batteries. I have developed it on a Einhell battery. (Long Version) Special feature: This holder uses the original locking mechanism of the Einhell battery. Secure hold. Material: PETG Layer: 0.2mm…
From Appa1990's (https://www.printables.com/social/278703-appa1990/about) file grab, either here or on Thingiverse. Should scale up fine, smaller will get trickier. It will need supports. Dot of glue for the rudder. Printed here in PLA,…
Updated the original faceplate for multicolor print and added a stroke around the edges. Also removed the fillet from the hexagon corners. Made to match this Mini SB…
I hung my honeycomb wall on a cement wall so i needed to use command strips around the entire thing. The original only worked on the top and bottom sides so i rotated the insert piece so that it would fit on the flatt(er) sides as well.
This model is compatible with the lego system.
Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…
I needed a tablespoon that could reach down in a big bag/container for my powdered drink supplements. I gave a basic kitchen table measuring spoon a longer handle. Please print this in PetG for food safety. you might want to tweak the…
This model is compatible with the lego system.
my second made viking ship longboat
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** These hard cases: Fit the Pinecil Smart Mini Portable…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Bracked mirrored. Remix from https://www.thingiverse.com/thing:4943241 Category: Electronics
Viking Long Seax (Saks). This sword was classified as a short sword/ long knife with a heavy tang, designed for chopping and breaking. Mostly made during the Anglo-Saxon age, this was the European version of Egypt's Khopesh knife. The…
我是奶龙🌝 我是奶龙🌚🌚🌚 我才是奶龙😡😡😡 饿饿饿饿饿（犯甲沟炎了） 今夜星光闪闪😁😁 我爱你的心暖暖🤮🤮🤮 想你一晚又一晚🫣🫣🫣 把爱你的心都填满❤❤❤ 享受爱情的苦😍😍😍 做你的小公主🙄🙄
There's some hooks out there that are designed for the hook hole that you get in the end of straightedges, but I wanted something that's more of a slot, so this idea popped out of my head. Basically, there's two pieces to this, you print…
This model is compatible with the lego system.
I have a long reverse bowden tube on my printer and thus needed a large buffer array for automated filament changes with an mmu. I designed this filament buffer to accommodate up to 1 meter retractions but by cutting down the front…
This model is compatible with the lego system.
This is a full size long distance disk golf driver that flies in a straight path. Feel free to look at other things that I have 3d printed on my Etsy shop: https://www.etsy.com/shop/BrownCircle3D?ref=l2-about-shopname print…
MStence made a very nice design of a clamp (F-style as found here: https://www.thingiverse.com/thing:2767847 ) that fits on standard 3/4" conduit. By applying standard conduit / tube you can make a very long clamp to keep over-sized stuff…
This model is compatible with the lego system.
⚠ Printing Tips & Recommendation This is my personal recommendation to ensure a successful print. While it may not be necessary on all printers, I highly suggest enabling these settings as a precaution. It can save you from fallen…
Soldering iron stand for Pinecil v2 made of 2 bearings D22x7, beer lid D28x7, sponge 50x40x5, copper sponge D34 and a little 3d magic The model has been completely redesigned: It now supports long and short tips. Added a hole for a copper…
Bought a WeVibe Bond and discovered it's really not made for all sizes. It does come with an expander link to add a couple of millimeters, but that's not nearly enough. So I made this model in Fusion 360. It's has parameters, so you can…
I made arm guards for the Flywoo Explorer LR which are higher than the original ones. This way the arms stay fully protected with mounted side plates. With the original ones the side plates are higher than the arm guards making them less…
Remix of @cq_15273 "Infinitely Extendable Long Tube Nozzle - Dyson >=V7", adapted the size to fit the Dyson Big Ball.
A deck for a long ship for DnD. I made it to use as little space as possible, while still keeping some level of detail. The grid is 25mm/1 inch. There is a version with shield and one without. The rowing benches are made to fit in the…
The original version is far superior to the stock steering arm. I modified it so the slotted piece of the arm that attaches to the servo was longer. The original model would make the front end dip down when steering extreme left or right.…
I really like this project! Had to wait quite a while for the parts coming from China but when everything had arrived the build was done in some hours. It does not have much power but it flies quite good and you have a lot of stick time…
Zortrax m300 door hinge replacement. The original door is very heavy and the printer body is metal so I did not want to drill anything so I made this long hinge that can be glued. I used superglue on the inside and hot glue on the…
A path extrusion function that can be adapted for different functions. Two extrusion classes are currently implemented: flat profiles in one axis Vertically-aligned along a cylinder Radially-aligned along a cylinder (may have difficulties…
Side table that fits onto the armrest of a couch or sofa with remote control slot and a small rim to secure the content.
It fits perfectly, so ensure the tray is aligned and push it down vertically.
Elements prepared for 3D printing from resin. The fasteners must be glued together when making a long chain. In another project of mine, you can download the individual elements and build the string on your computer, then print it. For…
A long hook for the multiboard system Uses the new “on grid” snaps and “Locking Bolts” Prints flat side down for strength and convenience
The scaffold comes from a YouTuber that explains it way better than me here: I used a helper tool (included) to form the coil, ideally AWG 12 I haven’t had a chance to properly test this yet but the range is at least on par with an eBay…
Longer couch legs to allow the Roomba to go underneath. Same base and angle as the originals, just extended another 2.5". I used 4 walls and "Support Cubic" pattern - 20% infill. Seems to be holding up just fine after a number of days.…
+ longer body to ease the bending of cables. + guide to help bottom to stay in place. Assembly notes DO NOT remove red plastic protection of heatbed cables. Bend is longer so you won't wreck the cables. The rest is like…
Long hook for Element System Peg Board Tool Holder
LatteCrema preparation tool holder. print instructions: nozzle 0.6 mm layer height 0.4mm infill 20% walls 3
the speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
This is a modified cheek rest that allows for the jam door to be opened. This design only includes a modified right side cheek rest due to the jam door not being covered on the left cheek rest.
This remix adds support for the long piece for the klicky probe. Print as per Ender 3 NG guide.
Tiro il Dino is a pull-along toy designed for young children, inspired by Montessori principles: simple shapes, clear materials, and an intuitive function. The dinosaur features a front eyelet where a cord can be attached, allowing kids…
1:18 scale model of the Shenlongsaurus from the “Weird Birds” web series. This was made in collaboration with Archesuchus. It measures 5.125" tall and is 7.6" long (from head to tip of tail feathers) The model features detailed scale and…
This is an enclosure for the PixLite 16 Long Range Mk2. It includes a slot where the network cable is going, a slot to mount a 12V power socket with 7,6mm diameter, 4 slots to install DMX outputs, 10 network cable output slots and a mount…
As a pilot, I find the workings of aircraft mechanics extremely fascinating, which is why I am so enthusiastic about Chris B's variable pitch propeller mechanism and wanted a model with longer blades, so I built one myself. Therefore…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
Good option for marble filament. Measurements: x - 104.77mm, y - 234.95mm, z - 19.05mm.
Let me know what else you want added
In this electrifying digital artwork, a right-handed cricket maestro takes center stage at long-off, ready to unleash a mesmerizing pool shot. With every muscle poised and the bat held high, he exudes power and finesse, promising a…
The Nespresso Pixie (Delonghi model) has a drip tray which does not allow for tall coffee cups/mugs. This replaces the drip tray assembly and allows for large coffee mugs for your delicious brew.
Since the short one did so well decided to do a long version with a little more room for those with bigger hands. Print at angled flat side ( see 2nd picture for reference). Included is a non-textured and textured version. 6…
Just print as it is
Viking longboat in 7 parts. The sail, stand, and shields do not require supports if laid flat on the print bed. Alas, the rest of the files do... You can shape the sail by hand: lift it from the bed while it’s still warm after printing,…
testing stringing for constant short and long distance with different wall numbers
Bitholder for 32 long bits and Hexagon Bitholding Screwdriver Hexagon Bitholding Screwdriver is for Wera 816R or 817R The bits should be at least 75mm long, for example KS-Tools 911.7550
Sorry, my English is bad, this is google translate. My experimental project of dust filters for PC, which was motivated by the original filters from the excellent compact case Jonsbo Z20, which perfectly protect against mosquitoes and…
Design Concept The Long Screwdriver Bits Case is a cylinder case with a threaded lid, designed for efficient storage and easy identification of 100mm length screwdriver bits. Each case has 6 hex-shaped holes for securely holding the bits…
The original upload by Melted-B was not optimized. I printed one in the horizontal position with supports and it did not turn out well. The bottom was stringy and the end tabs broke off almost immediately due to the orientation of the…
This model is compatible with the lego system.
This is a simple and quick to print wall hook for a hanging a longboard to the wall. I used a 1/8 inch thick screw to mount it, which is a little under 4 mm for those using smart person units. I printed it on the side, which gave it…
Capture the essence of elegance with this stunning female figurine STL file, perfect for any 3D printing enthusiast seeking sophisticated desk decoration. This beautifully detailed statue showcases a graceful woman with flowing long…
A friend of mine always forgets to put his beer back on the coaster so I designed a coaster which stucks onto the bottle. This design only works for Longneck Bottles, 330ml. Through the different patterns you can always recognise which…
Hello! This is a parametric pipe cover, designed to hide the (ungly) plumbing pipes coming out of the wall. I used it to hide the central heater pipes. There is two model: - The circular one, which works perfect for pipes coming out at…
⚠ Be aware this model has not been printed and tested as complete part yet. ⚠ I reverse-engineered the Delonghi ECP front panel as best and close to the original as i could. The original intention was to then modify it for mounting a…
The Vulcan "salute" was devised by Leonard Nimoy, who portrayed the half Vulcan character Mr. Spock on the original Star Trek television series. A 1968 New York Times interview described the gesture as a "double-fingered version of…
Couldn't find what I was after so made one. This is a holder for longer breadboards can hold 3 breadboards in a 1u wide slot total dimensions is 1UX5U. Also has a nice spot at the bottom for some storage maybe jumper cables or some steel…
![#0120 Pinecil V1/V2(BB2) Hard Case for Smart Mini Portable Soldering Iron [4x Long and Short Solder Tips]](https://media.printables.com/media/prints/707372/images/5799893_63b32ed3-1fd9-4f9b-8fb9-50cff4bf3655_ddbabf90-1a1a-4db2-8426-259fbbb81d1a/20240128_195410.jpg)
