Ender-3 Easy Space Saver Control Mount - Easy Print (fits S1 & V2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy printing alternate control mount for Ender-3 S1 to reduce the footprint. Hope you 'like' it! :P
- Ocena
- 4,903 / 5
- Polubienia
- 185
- Pobrania
- 1026
- Wydruki
- 33
- Wyświetlenia
- 6685
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Easy printing alternate control mount for Ender-3 S1 to reduce the footprint.
I wanted to reduce the footprint of my new S1 and made a new mount that moves the control inward so it doesn't protrude out the side past the gantry. It's easy to print, uses the stock screws and has the bits that allow the control to click into place like the stock one.
Does not interfere with printing, is easy to swap, and increases the clean looks of the S1.
Pairs nicely with my other S1 thing: https://www.printables.com/model/178925-ender-3-s1-stealth-light-bar-easy-to-print-and-do-
Hope you find it useful! …Likes & Downloads appreciated… :)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15
Notes:
Super easy to print side down. I opted for supports, though they are super small, just to make sure my keyholes were perfectly round on the inside.
Post-Printing
How I Designed This ===================
Accurate measurements.
Turns out the stock keyhole placement wasn't symmetrical. Who would have thunk it? Did careful measurements of the frame detent and the surface bumps so that the mount would be sturdy, secure, and allow the control to lock in place like the original one.
Category: 3D Printer Accessories