Two-gang switch box - 88mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two gang box for low-voltage use. 88mm deep.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I needed a fairly deep switch box in order to finish up a project of installing speaker wires and a fiber optic line to an uninsulated garage. The support on the back of the fiber cable prevents it from being installed in a standard 50mm box. I first printed a 30mm extension, but decided it was easier to print a whole new box. I've included the extension here as well, for people who want to go that route. The electrical box I bought has several sets of holes, so I used holes in the corners to attach the extension, and the holes more centered, to install the keystone plates. I only needed the one opening in the bottom, and didn't need it threaded.