1 / 6
Amigos de Merda & Nós Não Testamos Este Troço - Card Game Rugged Box — zdjęcie 1
1 / 6

Amigos de Merda & Nós Não Testamos Este Troço - Card Game Rugged Box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Box for the games "Amigos de Merda" (Shitty Frriends) and "Nós Não Testamos Este Troço" (We Didn't Playtest This At All)

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Those are rugged boxes specifically designed and modified for the brazilian version of those 2 games. 
It was made to snugly fit the sleeves I have for the original 56x87mm cards so I've configured it to acommodate the sleeve size which would be something like 60x92mm

You can change the Card parameters on the f3d file to suit whatever card dimensions you need, in case you need it for a different game that also can be divided into 2 decks. 

I recommend printing it with 0.2mm layer height, 3 walls and adaptative layer height. PLA will work just fine. Just make sure you screwed everything before trying to move the hinges to avoid stress on the plastic. 

The separator should be glued in place and held with a piece of tape until the glue dries out, otherwise it will fall as soon as you close the lid. You'll notice some small diferences in the white box design as it was the first one I made. The black one improved on the first, but they have essentially the same measurements. 

You can later print whatever stamp you need in adhesive paper on any colored paper printer and add it to the box to make it pretty. I'm not including any of them here for copyright reasons. 

Tagi