DanPistol Improved Mag Release Arms (for Worker Mags)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified mag release arms to engage and retain Worker Angled 10rnd Talon Magazines better.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I found the original magazine catch/release arms were okay, but I exclusively use 10 round angled worker magazines and I found that when locked in place they were still a little loose, particularly up and down.
Purpose of this remix:
Remove the wobble and lock the magazine in it's uppermost position
Reduce frequency of dart loading failures
Make loading/reloading a little snappier
Add a little nubbin on the end of each arm to make retaining springs a little easier
It's worth stressing that I did this specifically for worker 10 round angled mags, so on my blaster I used the same profile for both arms since I had no need for the higher position catch. YMMV, but I have provided the left arm on it's own too.
For my worker mags this update feels much better, mostly just by adding ~1.2mm to the height of the catch protrusion. It's worth noting clearly though that my experience with these with straight worker mags has been mixed, so I will endeavour to improve that in the future.