DanPistol Improved Mag Release Arms (for Worker Mags)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified mag release arms to engage and retain Worker Angled 10rnd Talon Magazines better.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
I found the original magazine catch/release arms were okay, but I exclusively use 10 round angled worker magazines and I found that when locked in place they were still a little loose, particularly up and down.
Purpose of this remix:
Remove the wobble and lock the magazine in it's uppermost position
Reduce frequency of dart loading failures
Make loading/reloading a little snappier
Add a little nubbin on the end of each arm to make retaining springs a little easier
It's worth stressing that I did this specifically for worker 10 round angled mags, so on my blaster I used the same profile for both arms since I had no need for the higher position catch. YMMV, but I have provided the left arm on it's own too.
For my worker mags this update feels much better, mostly just by adding ~1.2mm to the height of the catch protrusion. It's worth noting clearly though that my experience with these with straight worker mags has been mixed, so I will endeavour to improve that in the future.