NewPrusa2Bambu - Adapt modern (RFID) Prusement spools for Bambu Lab compatible refils!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapt modern (RFID) Prusement spools for Bambu Lab compatible refils with only 4 heatsets and 4 screws!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- CERN Open Hardware Licence Version 2 - Strongly Reciprocal
This is a crude and simple (but highly functional!) adapter for modern RFID Prusament spools, allowing you to turn them into bambu-lab refill compatible ones!
As much as I hate Bambu, most of the industry (including my manufacturer of choice - Spectrum) has moved towards Bambu Lab style spools, so I decided to make this adapter, allowing you to use either type.
Usage:
Prepare 4 heatset inserts, 4 M3x8 screws, 4 washers (optional but recommended)
Tools needed: Drill, 3.5mm-4mm bit, hex key/screwdriver for your screws
Take apart your prusament spool
Use the drill guide to... guide.... your drill.... yeah you get it. into the proper spot to drill 2 3.5 holes in either side of the prusament spool.
Add heatset inserts into the printed core
Screw the core to the spool on one side, remember to use washers
Add your spool
Secure from the other side with screws and washers
Printing suggestions:
4 walls
15 % infil
Any material, PLA will do just fine, no need to get fancy
No supports, brim, etc. needed with PLA
Includes FreeCAD project file!