1 / 1
Bestway Steel Pro Max 10ft Solar Heater Return Pipe Clip — zdjęcie 1

Bestway Steel Pro Max 10ft Solar Heater Return Pipe Clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple bolt-on clip for the Bestway Steel Pro Max 10ft pool that securely holds a 16mm irrigation pipe

Ocena
5 / 5
Polubienia
17
Pobrania
32
Wydruki
1
Wyświetlenia
609
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I built a simple DIY solar pool heater using 16mm irrigation pipe, but I needed a tidy way to secure the return pipe over the side of my Bestway Steel Pro Max 10ft pool.

The result is this bolt-on clip that mounts securely to the top rail of the pool and holds the return pipe in position, allowing the warmed water to flow neatly back into the pool without the pipe moving around or slipping out.

The design consists of a mounting bracket that clamps to the pool frame and an integrated clip that securely grips standard 16mm outside diameter irrigation pipe.

Features

  • Designed for the Bestway Steel Pro Max 10ft pool

  • Holds 16mm OD irrigation pipe

  • Prevents the return pipe from moving or falling out

  • Keeps the return water directed into the pool

  • No supports required

  • Easy to install and remove

Print Settings

Recommended material: ASA (used for the original print)

ASA was chosen because the part is exposed to:

  • Direct sunlight

  • Rain

  • Heat

  • Chlorinated pool water

PETG should also work well for most users, although ASA will provide better long-term UV resistance if the part is left outside all summer.

Recommended settings

  • Layer height: 0.20mm

  • Perimeters: 3–4

  • Infill: 25–35% (Gyroid or Grid)

  • Supports: None

  • Print orientation: As supplied in the STL

Compatibility

Designed for:

  • Bestway Steel Pro Max 10ft above-ground pool

  • 16mm outside diameter irrigation pipe

It may also fit other Bestway pools that use the same style of top rail, but I have only tested it on my own 10ft Steel Pro Max.

Notes

This was designed specifically for my DIY solar heater setup, which uses long runs of black 16mm irrigation pipe as a solar collector. The clip has been holding the return pipe securely while the pump is running and keeps everything looking much neater than cable ties or temporary hooks.

If you use a different pipe diameter or a different pool frame, feel free to remix the design to suit your setup.

Tagi