Bestway Steel Pro Max 10ft Solar Heater Return Pipe Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bolt-on clip for the Bestway Steel Pro Max 10ft pool that securely holds a 16mm irrigation pipe
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 32
- Makes
- 1
- Views
- 610
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I built a simple DIY solar pool heater using 16mm irrigation pipe, but I needed a tidy way to secure the return pipe over the side of my Bestway Steel Pro Max 10ft pool.
The result is this bolt-on clip that mounts securely to the top rail of the pool and holds the return pipe in position, allowing the warmed water to flow neatly back into the pool without the pipe moving around or slipping out.
The design consists of a mounting bracket that clamps to the pool frame and an integrated clip that securely grips standard 16mm outside diameter irrigation pipe.
Features
Designed for the Bestway Steel Pro Max 10ft pool
Holds 16mm OD irrigation pipe
Prevents the return pipe from moving or falling out
Keeps the return water directed into the pool
No supports required
Easy to install and remove
Print Settings
Recommended material: ASA (used for the original print)
ASA was chosen because the part is exposed to:
Direct sunlight
Rain
Heat
Chlorinated pool water
PETG should also work well for most users, although ASA will provide better long-term UV resistance if the part is left outside all summer.
Recommended settings
Layer height: 0.20mm
Perimeters: 3–4
Infill: 25–35% (Gyroid or Grid)
Supports: None
Print orientation: As supplied in the STL
Compatibility
Designed for:
Bestway Steel Pro Max 10ft above-ground pool
16mm outside diameter irrigation pipe
It may also fit other Bestway pools that use the same style of top rail, but I have only tested it on my own 10ft Steel Pro Max.
Notes
This was designed specifically for my DIY solar heater setup, which uses long runs of black 16mm irrigation pipe as a solar collector. The clip has been holding the return pipe securely while the pump is running and keeps everything looking much neater than cable ties or temporary hooks.
If you use a different pipe diameter or a different pool frame, feel free to remix the design to suit your setup.
