Tecnam P2002/Tecnam/Airplane/Aircraft/School Aircraft/School Airplane/PPL/Model Airplane/Model Aircraft/Model/Display Model/Display Airplane Model/Display Aircraft Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tecnam P2002
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
!!!SCALE THE MODEL!!!
Please be very careful when removing the printed parts from the build plate and during assembly, as some parts are delicate and can be damaged if excessive force is applied.
For the best print quality, I recommend using a 0.16 mm layer height. I printed the entire model with this layer height and achieved very good surface detail and fit.
If your slicer supports it, I also recommend using Variable Layer Height. It can improve the surface finish on curved areas while reducing the overall print time.
For the best balance between print quality and material efficiency, I recommend cutting the model into parts yourself in your slicer. Every printer is different, so you can choose the split locations based on your own experience and what works best with your machine.
The infill percentage is up to you. Depending on whether you want a lightweight display model or a stronger print, you can choose the infill that best suits your needs.
Important:
The assembled model is tail-heavy, so it will naturally tip backwards.
If you print this model, I'd love to see your make. Enjoy printing!