FNIRSI HS-02 Gridfinity Bin (reuses the official case parts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bins for the FNIRSI HS-02 that reuse the original stand, silicone tip holder and tip cleaner.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
FNIRSI HS-02 Gridfinity Bin (reuses the official case parts)
I like the original FNIRSI HS-02 case, but it's just a bit wider than 2 Gridfinity units.
The goal of this model is to keep everything useful from the stock case (the silicone tip holder, the iron stand and the tip cleaner) and rebuild it as proper Gridfinity bins.
- Iron bin: 5x2 grid, 6 units high. Holds the soldering iron, the original stand and the tip cleaner.
- Tips bin: 3x2 grid, 3 units high. Holds the original silicone tip insert.
Note: the photos show earlier prints. The STL files include a few small
fixes made after those prints, so you may notice minor differences between the
pictures and the parts you get. The uploaded files are the up to date ones.
Files
File | Notes |
|---|---|
| Main bin, receives the stock stand and tip cleaner |
| Bin for the tips |
| Press-fit cradle for the stock silicone part |
Print settings
- Material: PLA
- Layer height: 0.2 mm
- Infill: 10%
- Supports: none
- Orientation: all parts flat on the bed. The tips holder must be printed with the opening facing up.
- Printed and tested on: Bambu Lab A1 mini and Snapmaker U1.
Teardown of the official case
1. Remove the 6 screws on the bottom of the case.
2. With a flathead, push the white clip inwards to separate the top shell from the bottom shell.
3. Unscrew the iron stand from the bottom shell. Keep the stand, its screws and the tip cleaner.
4. From the top shell, remove the 3 screws and keep the silicone tip holder.
Everything else (the plastic shells) can be recycled.
Assembly
Tips bin
1. Slide the original silicone part into the printed holder.
2. Clip the holder into the tips bin. It's designed to be a tight press fit, so
depending on your printer tolerances a bit of sanding may be needed.
Iron bin
1. Drop the original stand into its slot and screw it down with the original screws
(the ones that held it in the case, or any of the other screws from the case,
both work).
2. Drop the tip cleaner into its dedicated hole. No fixing needed.
Credits
Gridfinity system by [Zack Freedman](https://www.youtube.com/@ZackFreedman).