1 / 2
Logic Probe Storage Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for a logic probe
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was surprised that I couldn't find a simple case for a logic probe. Every search came up with homemade ones or a PVC-type storage so I decided to make my own. I took the Pinecil case and remixed it to give it a proper home and to protect the probe tip. Hope people will get some use out of this.
The bottom shell is 2 part as was the original design. Actually makes it easy for a multicolored print IMO. Mine had a satisfying fit. Just superglue the two parts together. The top half was completely redone to be one piece.
Use filament scrap for the hinges.