Desiccant-Free Rear Hygrometer / Thermometer Holder for the Polymaker PolyDryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear hygrometer / thermometer holder for the Polymaker PolyDryer that does not have desiccant storage.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried a number of rear hygrometer / thermometer / desiccant holders including the excellent, supportless remix by Robinson; but I found that all of them rubbed against some of the larger spools that I use.
And let's face it, there must be at least 30 other ways to stuff more desiccant in a PolyDryer, so I removed the entire storage container and reinforced the remaining model to create a thin, shallow hygrometer / thermometer holder that does not interfere with spools.
I print them in Polymaker ASA using the standard Voron print settings for functional parts:
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill percentage: 40%. --> recommended for functional parts that are subject to regular use.
Infill type: gyroid or cubic --> cubic is much faster and the same strength as gyroid.
Wall count: 4
Solid top/bottom layers: 5
Supports: YES! I used Grid / Snug. Tree (Organic) should also work fine.
Brim: if needed for your filament
Have fun watching your spools dry! 🔥