1 / 7
Desiccant-Free Rear Hygrometer / Thermometer Holder for the Polymaker PolyDryer — image 1
1 / 7

Desiccant-Free Rear Hygrometer / Thermometer Holder for the Polymaker PolyDryer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Rear hygrometer / thermometer holder for the Polymaker PolyDryer that does not have desiccant storage.

Rating
5 / 5
Likes
7
Downloads
22
Makes
0
Views
110
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

I tried a number of rear hygrometer / thermometer / desiccant holders including the excellent, supportless remix by Robinson; but I found that all of them rubbed against some of the larger spools that I use. 

And let's face it, there must be at least 30 other ways to stuff more desiccant in a PolyDryer, so I removed the entire storage container and reinforced the remaining model to create a thin, shallow hygrometer / thermometer holder that does not interfere with spools.

I print them in Polymaker ASA using the standard Voron print settings for functional parts: 

  • Layer height: 0.2mm

  • Extrusion width: 0.4mm, forced

  • Infill percentage: 40%. --> recommended for functional parts that are subject to regular use.

  • Infill type: gyroid or cubic --> cubic is much faster and the same strength as gyroid.

  • Wall count: 4

  • Solid top/bottom layers: 5

  • Supports: YES! I used Grid / Snug. Tree (Organic) should also work fine.

  • Brim: if needed for your filament 

Have fun watching your spools dry! 🔥

Tags