1 / 1
1x2 Cube-It
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the printable 1x2 Cube-It.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is the ready to print file for our 1x2 Cube-It! The 1x2 is a part of our Basic Blocks to suit all of your needs.
Printing Instructions:
Orient the part with the cells facing the build plate
In the slicer add a print pause at 3.6mm and at 14.6mm
When the first pause happens place one M3 square nut in the square hole in the center of the part and resume the print
When the second pause happens place one M3 8mm flat head screw with the threads pointing up into the hole and resume the print
Once the print finishes your Cube-Its are ready to use!