Updated MarcoZ76 v2 Prusa Bondtech BMG MK3S MK2.5S extruder rear housing better pinda holder + Dragon Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remake of rear housing for Prusa BMG Bondtech extruder with tighter nut holes and 2.5S improved pinda mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is the rear section of MarcoZ76 Prusa Bondtech extruder with some modifications as i found loose nut and magnet holes and parts that cracked around the pinda holder were engineering issues so i redesigned with stress relief and removed the additional rear position as that didn't suit my application and printed in polycarbonate carbon fibre .
Changes :
Square nuts now slide in with a little force and dont fall out .
Hexnut in the heatbreak wind tunnel also tightened so it does not keep falling out.
Tightened the hole that holds the magnet as that kept poping out .
Added a stress relief to the top of the pinda probe mount and removed the holes for the rear mount position, because i found that it wanted to keep cracking through the upper hole ( pointed out in the images )
added version for Phaetus Dragon fixed mount to stop swivel and give one handed nozzle change.
Added another increased support around pinda probe as still having problems with cracking.
enjoy , leave comments let me know if it works for you.
