1 / 14
Updated MarcoZ76 v2 Prusa Bondtech BMG MK3S MK2.5S extruder rear housing better pinda holder + Dragon Mount — image 1
1 / 14

Updated MarcoZ76 v2 Prusa Bondtech BMG MK3S MK2.5S extruder rear housing better pinda holder + Dragon Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remake of rear housing for Prusa BMG Bondtech extruder with tighter nut holes and 2.5S improved pinda mount

Rating
0 / 5
Likes
2
Downloads
5
Makes
0
Views
94
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

This is the rear section of MarcoZ76 Prusa Bondtech extruder with some modifications as i found loose nut and magnet holes and parts that cracked around the pinda holder were engineering issues so i redesigned with stress relief and removed the additional rear position as that didn't suit my application and printed in polycarbonate carbon fibre .

Changes :

  • Square nuts now slide in with a little force and dont fall out .

  • Hexnut in the heatbreak wind tunnel also tightened so it does not keep falling out.

  • Tightened the hole that holds the magnet as that kept poping out .

  • Added a stress relief to the top of the pinda probe mount and removed the holes for the rear mount position, because i found that it wanted to keep cracking through the upper hole ( pointed out in the images )
    added version for Phaetus Dragon fixed mount to stop swivel and give one handed nozzle change.
    Added another increased support around pinda probe as still having problems with cracking.

enjoy , leave comments let me know if it works for you.
 

Tags