Counting matching models…
This model is made to adapt the filament sensor with Prusa MMU2S and Bondtech extruder. Just mount the filament sensor circuit board upside down and mount the adapter on top of it. I used a heat set insert (Tappex Microbarb M5) to screw…
5020 fan upgrade for mk3s bear (Bondtech Extruder) .I printed parts with sla high temp material, for best look and resistance. Can be printed in PETG or PA variants. M3x5 4pcs. M3x10 2pcs. M3 nut 1pc. Fan i decided to solder on a 3 pin…
Top plate for Cristian's CNC Toolhead mount for RatRig V-Core 4 . I've found that if you use large (3-5kg) spools and/or have a very long filament path, performance with this large extruder is greatly improved. I have both and have tried…
The original cooling duct that came with the DDX was not doing it so I made my own.
This is a remake of the CR-10S Bondech extruder part with the filament sensor housing adjusted to fit the current shipping PCB with the switch, - Original one does not line up with the filament path due to a change in the PCB design from…
This video is a complete walkthrough for the Bondtech DDX extruder upgrade for your Creality 3D printer. I am also installing a Slice Engineering Mosquito Magnum hot end with 50W heater cartridge and 300 degree thermistor. This…
The filament sometimes catches on the wall of the hole, so I made a remix to fit the PTFE tube inside.
I did not find a suitable fan holder for my new Bondtech clone extruder, so I created this one. It fits to this X carriage: https://www.thingiverse.com/thing:3510996 Edit: I made also a stronger version (but more material and weight).…
This is a remix of the original Bondtech DDX v3 for Creality BL-Touch mount to also mount an ADXL345 Acceleromenter for klipper input shaping tuning. I printed this with tree support touching build plate only. Print Settings Printer…
Bondtech tension knob cover. Print in 98A tpu. Might work in other materials but you may have to scale it to fit right. tested in 98A tpu and works great. Indicator mark is for counting turns to fine tune the tension on the extruder,
I had issues with the mount flexing and eventually snapping off. I had some 2mm metal pins left over from another project so I added holes to insert a couple of those. I also replaced the locating pins with holes so screws can be added to…
This is my attempt on making the printer head lighter and more precise. It utilizes a BambuLab hotend, or in my case a very good copy, and the BondTech extruder made for the Wanhao D6. Also remote cooling with CPAP-tube. My goal is to…
My first contribution to the thingiverse. I decided to upgrade my FT-5 to an E3D V6 with a bondtech BMG and was quite frustrated to find the 30mm fan didn't work (at all). With nothing but a 40mm noctua laying around, I got busy in…
The bracket is 11mm longer, to align with Bondtech BMG. Everything else is the same. Print Settings Rafts: No Supports: No **Resolution:** 200 Infill: 20 **Filament:** PolyMaker PLA Category: 3D Printer Parts
Deprecated: Please use newer V3 . Description This is my 2nd design for a mount of the Bondtech LGX® Extruder with the LGX® Shortcut Copperhead Printhead (formerly known as LGX FF for Flexibles), with optional mounts for a BLTouch probe…
Remix of 2 parts in the https://www.thingiverse.com/thing:4329200 to allow it to mount a Bondtech LGX lite extruder. Need to change the lower M3 screw of the Bondtech LGX lite with a longer 30mm one. Also uses a M3 screw instead of a M2…
First of all thanks to @KalleKnall for providing the step files. This is the fan duct design that aims to fix airflow to the back of the model and improve overhangs. It also has PINDA support to prevent sagging. My favorite fan duct…
- See @Kevin_83794 's model description for details about the PTFE tube. - In my remix you still need to drill out the screw holes, but with a 2mm drill. - You can use the existing holes in the Dragon heatsink without drilling them out. -…
A easy to assemble filament sensor 2x10mm m2 tread screws 2x8 m3 counter sunk screws 1 4.5 mm BB ammunition for airsoft 1 omron switch
I built this custom model for the left and right belt retainers for the Bondtech LGX Lite Pro XY Carriage. These models are not based on the original ones in any way (long story :-D) I have tested dozens of variations and found this one…
Remix design to allow a better air flow fan duct to mate to the existing fan geometry. It works as intended but it's not the most pretty of finishes; it's functional and the cooling for PLA on the LGX-FF is superior to the stock part.…
Remix of BLTouch Mount for Bondtech Prusa Extruder
This design allows you to mount the Bondtech LGX Lite PRO extruder onto the RatRig V-Core 3.1 and V-Core 4 3D printers. The Bondtech LGX Lite PRO can be purchased here: Recommended Printing Material For optimal performance and durability,…
Since Bondtech has discontinued the DDS Gen 2 for CR-10s they no longer sell the replacement fan shroud, and I was unable to find a replacement model online. Bondtech did release an stl for a shroud with increased height for a volcano v6…
Das Bauteil „Ir sensor cover dissed s“ wurde leicht abgeändert und um ein M10x1 Gewinde ergänzt, um ein einschrauben eines PC4-M10 Adapters zu ermöglichen. Print Settings Printer: Prusa MK3.5S Rafts: No Supports: No Resolution: 0.15mm…
Bondtech BMG Lever Arm I modeled the lever arm as well as the entire BMG extruder in Fusion360 in order to upgrade it and keep the secondary hobb gear from falling off the lever arm every time you opened the extruder. I am sure many of…
"PTFE" FDM printable BMG Bondtech extruder for Prusa This design is based on MarcoZ76's Bondtech BMG Upgrade MK3S FDM printable new sensor integrated and Bondtech BMG Prusa MK3S/MK2.5S v2 FDM printable + RHD ver.C fan Shroud with some…
Remixed one of the front options to allow for a threaded heat inset instead of a captive nut for the idle tension knob.
I modeled this Bondtech BMG Direct Drive Extruder mount for the Ender 3 pro because of finding other models that caused hole misalignments to the original aluminum mount. Layer Height: 0.16mm Infill: 25-50% Supports: Yes (Tree Supports)…
When installing a Bondtech Extruder with included ender 3 mount, you lose the ability to hold the X-Axis cable. Bondtech item: https://www.bondtech.se/en/product/creality-cr-10-kit/ My simple design will allow you to secure your cable.…
Description This is my 3rd design for a mount of the Bondtech LGX® Extruder with the LGX® Shortcut Copperhead Printhead (formerly known as LGX FF for Flexibles), with optional mounts for a BLTouch probe and an ADXL345 IMU for resonance…
This base works with Mini Splitter v2 for MMU2+1s mod by Ryper3D | Download free STL model | PrusaPrinters or Mini Splitter for MMU2+1s mod by Ryper3D | Download free STL model | PrusaPrinters . I have the Bondtech Upgrade Kit for Prusa…
Note: I haven't actually installed this and ran any prints on the Prusa Mini+, so use at your own risk. I didn't test out the flush plate, but included it anyway. Spacer plate to fit the Bondtech LGX Lite extruder on the Prusa Mini+. You…
Filament runout sensor for Bondtech LGX lite (v1 & v2) CHANGELOG: 17.02.2025: Initial release. Printing: Default voron settings, correct orientation, no supports needed! Bom: 2x 6mm FHCS - Needs to be stainless to avoid interference with…
Simple adapter to mount the LGX Lite to an E3D V6-type groove mount. I used a resin printer. FMD might be ok. Parts: 1x Mount (Printed) 1x Strap (Printed) 4x M3x6mm Button Head Screws 2x M3x12mm Cap Screw 2x M3 Nuts 1x Small section of…
Edit: There is now a sensorcover with a latch for the cable connector. To adapt my MK3 with Bondtech extruder to my MMU2S with the new IR sensor I made a new topplate with sensor housing. Included is a LED indicator to visualise the…
Soutien cable pour la FLSUN SR pour l'extrudeur Bondtech GLX avec les ventilateurs d'origine il y à un passage pour mettre un collier il faut mettre deux écrous carré livrés avec le Bondtech dans les logement prévu à cet effet dans le…
In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…
I upgraded my Voron 2.4r2 FDM printers to Stealthburner from the original Afterburner and after testing I replaced the original Bondtech LGX extruder to the smaller and lighter LGX Lite v2 which utilizes the large filament gears as the…
BLTouch Mount for this Bondtech Upgrade: https://www.bondtech.se/product/prusa-i3-mk2-5-mk3-extruder-upgrade/
Soutien câble pour la FLSUN SR pour l'extrudeur Bondtech GLX avec des ventilateurs 5015. il y à un passage pour mettre un collier il faut mettre un écrou carré livré avec le Bondtech dans le logement prévu à cet effet dans le GLX, sur le…
Important Note : this model is not my creation, but I did not find the equivalent here so I share my printing profiles as could be usefull When using an interchangeable nozzle on the printer, we need to be careful with the torque applied…
You can find here the official files provided by Bondtech useful to print PFTE tube cutter PFTE tube chamfer shaping supporting MINI heatbreak. Official supporting page here Video here
I adapted Livius's excellent X-CARRIAGE BACK for the Bondtech extruder clone. This upgrade splits the X-CARRIAGE BACK into two parts, so if you need to replace a component (like the thermistor, for example), you don’t have to unplug all…
Includes a filament sensor cover with a built-in cable guide. Add organic supports.
Update 2019-03-03: I've added a Version 2 of the cover. The Lever-screw now is used to secure the cover as well. You'll need an M3x12 screw now... Just a quick remix of the Bondtech Prusa i3 MK3s Sensor Add-On. This is intended to give a…
On all four of my Prusas, the sensor has failed after printing at this temperature for several days (the sensor falsely triggers even with filament inserted). Therefore, I assume this is due to the high temperature the sensor reaches…
There's not any side way mount for BMG. The normal rear mount did not have enough clearance for CR-10 chassis and front mount is a pain to dissemble without removing the whole printer from enclosure. Side way mount it is.
wanted to use 5020 fan. because they are more silent than 5015 fans and airflow is pretty nice. edited that hotend's fan duck and fan mount files. supports are needed.
Sensor cover I made in preparation of getting a Mosaic Palette to allow a bowden tube connection on the sensor cover. Printed in PETG.
Mount filament sensor directly on the extruder motor. Fit perfectly for Bondtech BMG. Category: 3D Printer Parts
I upgraded my Voron 2.4r2 FDM printers to Stealthburner from the original Afterburner and after testing I replaced the original Bondtech LGX extruder to the smaller and lighter LGX Lite v2 which utilizes the large filament gears as the…
Direct Drive base for HMG6 to use Bondtech LGX Lite and Phaetus Dragon (ridgid mount).
–UPDATE 2: I have added a new part „adapter_extruder_re_anguliert.stl“ which allows usage of a bigger and more powerful extruder stepper without losing build volume - see last picture. The only drawback of that one is that you need a…
Bondtech INDX Logo – Einbettbares 3D-Element für Maker-Projekte Verleihe deinen 3D-Druckprojekten einen professionellen Touch mit dem offiziellen Bondtech INDX Logo! Dieses Modell wurde speziell dafür entworfen, als Designelement in…
The purpose of this shroud is to enable use of the Bondtech LGX Lite Pro extruder with the Cartographer/Beacon3D bed scanner. There is no reason this shroud won't work with the stock Neptune 4 extruder, but there will be a lot of extra…
When you have a Bondtech QR and buying an Accante Cover you will determine, it will not pass with the outlets. With this holder you can pack the new Extruder on a better position to use with the cover. No need to glue or drill holes for…
I always have trouble assessing how far I have already turned the thumbscrew on the Bondtech Extruder. This small cap shows this quite clearly and you can better estimate quarter, half and full turns ;-) Version 2.0 (2024-06-14): V2 has…
Updated 13 March 2022: Added more support for the fan, it was prone to breaking; BV2-R2 v2 in the files section. Also, realigned the mounting holes so it stays above the nozzle and extended the fan duct further back to get better…
Update 20210718 - The spacer-free versions are now tested. They work, though some fittings are a little tight. You may need to ream a few holes slightly or use the hole expansion feature of your slicer to get it perfect. Will try to…
Just a quick remix to cross-reinforce the bracket. See the original for the remaining parts, it is the absolute best direct drive + V6 design I've seen yet, though it would frequently break off when tightened down. This remix tries to…
Dieses Cover ermöglicht es einen M6 Pneumatik Anschluss direkt an den Bondtechextruder anzuschließen. Damit ist das Filament, das aus der Trockenbox kommt nie an der Luft während des Drucks. Für die MMU ist auch so ein Anschluss…
This is the R4G extruder for Prusa printers, where the G stands for Greg or Geared. It's a DIY "Bondtech upgrade" that requires a very limited set of additional parts. It is derived from the Prusa R4 extruder of the MK3S (…
This model is made to adapt the filament sensor with Prusa MMU2S and Bondtech extruder. Just mount the filament sensor circuit board upside down and mount the adapter on top of it. I used a heat set insert (Tappex Microbarb M5) to screw…
This is a compilation of things in order to upgrade (or build) your Prusa I3 MK3S with MMU2S and Bondtech BMG extruder kit for MK3. I used the Bear X-Carriage with an adaptation for the Bondtech extruder and MK3S filament sensor (source:…
It's a remixed part from the JGAurora A5X Bondtech mount by seaspotter https://www.thingiverse.com/thing:3259649 I improved the part so that we can mount the original sensor runout. A PTFE tube is required between the entrance of the…
Full extruder assembly that connects direct extrusion BondTech BMG with E3D v6 hot end to linear rail via an extrusion mount that also holds a proximity Sensor. It makes for a nice compact setup. There are two extruder brackets included…
5020 fan upgrade for mk3s bear (Bondtech Extruder) .I printed parts with sla high temp material, for best look and resistance. Can be printed in PETG or PA variants. M3x5 4pcs. M3x10 2pcs. M3 nut 1pc. Fan i decided to solder on a 3 pin…
5020 fan upgrade for mk3s bear (Bondtech Extruder) . I printed parts with sla high temp material, for best look and resistance. Can be printed in PETG or PA variants. firmware CHANGES needed !!! Because nozzle sits 3.8mm lower. also pinda…
System of fixing of Bondtech wheels so it can release filament while the wheels are still synchronized. Usable for MMU.
Bondtech INDX system, files origin from https://github.com/BondtechAB/INDX I have painted this toolhead step file and separated each component to STL, so you don't have to I also share you a Blender file for rendering
For Palette 3 Pro, I propose you a clip for Bondetch BMG installed on a Prusa i3MK3S+ Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.16 Infill: 100% Filament: Prusa Prusament PETG Jet Black…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
I created this model because I have CNC gantry parts and don't want to lose them. Additionally, this adapter doesn't require the removal of any parts; just unscrew the Z-belts, feed them through the adapter, and re-tighten them. What you…
I created this model because I have CNC gantry parts and don't want to lose them. Additionally, this adapter doesn't require the removal of any parts; just unscrew the Z-belts, feed them through the adapter, and re-tighten them. What you…
Top plate for Cristian's CNC Toolhead mount for RatRig V-Core 4 . I've found that if you use large (3-5kg) spools and/or have a very long filament path, performance with this large extruder is greatly improved. I have both and have tried…
My MK3.5 has a Bondtech BMG extruder, and a horizontal fan mod. So the standard accelerometer mounting locations wouldn't work. With this model I can run the input shaping routing on my printer to get better results. This is also…
Adapter for BMG-M with mosquito and BMG mounting plate. Designed to be printed without supports. Edit: while upgrading I found a happy accident! The Duet3 Tool board (1LC) perfectly fits the 3 accessory holes placed at the top of the main…
Mount for Openbuilds C-Beam gantry plate ( http://openbuildspartstore.com/c-beam-gantry-plate/ ) to setup for 1 Bondtech BMG extruder. All holes that are not recessed will accept an M4 screw used in a self tapping method. The Recessed…
Version 2 Uploaded 12/8/2017 Change Log: Added BL Touch Mount, altered a few geometries for better fit, and added right Fan Mount (Left fan is in the works) [Fan is based on E3D v6 hotend]. Mount for Openbuilds C-Beam gantry plate (…
I did a fusion 360 reverse engineering of stl files. I modified the path of the gear to better fit and generally improved to print with FDM printer UPDATE 1 05/12/18* Added a new screw to better keep in place the e3d v6 extruder with less…
Zaribo X-carriage modified for Bondtech BMG Upgrade FDM printable MK3S new sensor integrated ( https://www.thingiverse.com/thing:3469271 ) N.B.: i have changed the position for the 3mm nylon support on the X cable holder. 07/03/19 UPDATE…
New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…
Simple tool to assist with consistently installing the 3x8mm magnets into the INDX toolholders. Requires: M3x8 SHCS x2 Thread the M3x8 SHCS into the top half of the tool. Make sure the 3x8mm magnets are oriented correctly (use an INDX…
*Work in progress. Still need to add pictures and documentation. Files used to add the Bondtech INDX system to a Voron Trident R2. Additional Hardware Required Front Idlers 1515 Extrusion (Horizontal frame extrusion width minus 35mm, ex.…
Work in progress of the Reverse mounted gantry for Bondtech Indx and Voron V2/Micron2020 recommended to use BFI front idlers if you use this setup you need to replace the rear extrusion with a piece of 1515 BOM In addition to stock v2…
Update 07JUL26: I've added a version with provision for ECAS fittings in the filament input holes, so that PTFE tubes from, e.g. dry boxes, can be inserted. The top (outlet) holes are unchanged, and use the supplied collets. NB. My model…
OFFICIAL INDX SV08 OG & SV08 MAX INTEGRATION By appointment from Bondtech! Bondtech supplied an INDX unit for testing & systems implementation. Welcome! Im glad you found us here! So you want to add INDX to your Sovol printer. This is…
The original model has the magnets too far, after a while the lever would get stuck By moving the magnet creates an stronger pull. Also the sensor would be floating and I added a resting place for the sensor…
The Demon INDX Belt Helper Tool allows you to keep both hands on the job without loosing track of your belts. It lets you lock the belts in the correct position relative to each other - so they'll always be the same length next to each…
There are two fan shrouds, i have modified. DDX_Fan_Shroud_5015 This is a mod from a non-v3 version into a v3 mount version. You need two M3x20 screws to mount the fan to the shroud and a M3 nut for the DDXv3 mount. DDX-V3_Fan_Shroud_5015…
used a 0.6mm cht with variable layer height and printed with ASA. m3x8 self tapping screws used
Created this mount to fix the rotation of the Phaetus Dragon in the Bondtech BMG extruder i just printed from MarcoZ76 BMG Bondtech which is a excellent extruder design but check my other models as ive made improved versions of the BMG…
Loved MarcoZ76 BMG extruder and a big thanks to him for this excellent model , I just found a few little things that bugged me , one major one being where the clamping force was being applied to a very thin section around the extruder…
