JGAurora A5X Bondtech and Runout Sensor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a remixed part from the JGAurora A5X Bondtech mount by seaspotter https://www.thingiverse.com/thing:3259649 I…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
It's a remixed part from the JGAurora A5X Bondtech mount by seaspotter https://www.thingiverse.com/thing:3259649
I improved the part so that we can mount the original sensor runout.
A PTFE tube is required between the entrance of the Bondtech BMG and the output of the Runout sensor.
Insert the PTFE tube into the BMG and cut the length flush (see picture) and then install the runout sensor.
There is also a support to attach the braided wire sleeve on the side with holes for zip ties.
*Printed and tested sucessfully 2019/06/20*
Print Settings
Printer:
JGAURORA A5X
Rafts:
No
Supports:
Yes
Resolution:
0.2 mm
Infill:
40
Filament:
Sunlu PLA+
Blue
Notes:
4 solid layers on bottom and top
3 peripheral layers
40% infill
Category: 3D Printer Extruders