Wanhao D6 (Duplicator 6) BambuLab hotend BondTech extruder rebuild
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanhao Duplicator 6 printer head rebuild
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 140
- Makes
- 2
- Views
- 1,109
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is my attempt on making the printer head lighter and more precise. It utilizes a BambuLab hotend, or in my case a very good copy, and the BondTech extruder made for the Wanhao D6. Also remote cooling with CPAP-tube.
My goal is to print really fast, with good quality, and also being able to print PLA, TPU, ABS and so on, materials that the D6 otherwise can't print. So far I have been able to print at up to 400mm/s with an acceleration of 15000 mm/s²
I'm running Klipper on this machine with input shaping. With the heavy stock parts, the resonant frequencies were around 25hz. With this being a lot lighter, the resonant frequency is now around 100hz, an enormous improvement!
PTFE-tube is needed inside of the printer body. It's a tight fit, so you may need to carefully drill a little bit. The tube needs to go all the way to the hotend and upp to the PTFE connector..
Various M3 screws and bolts is needed for assembly. Also a 30mm fan for hotend cooling.
This is still a work in progress