1 / 2
Dragon Hotend Adapter for Bondtech's MK3S Extruder Upgrade (but with M2 screws and nuts)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of @Kevin_83794's Dragon Hotend Adapter (but with M2 screws and nuts, and no drilling required).
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- See @Kevin_83794's model description for details about the PTFE tube.
- In my remix you still need to drill out the screw holes, but with a 2mm drill.
- You can use the existing holes in the Dragon heatsink without drilling them out.
- Use 6mm or 8mm M2 screws, there is enough space for both sizes.
- Note that M2 nuts are super tiny so it might be a good idea to super glue them in place beforehand to prevent them from spinning around if you accidentally tighten them too hard.