1 / 4
Pioneer minisplit remote magnetic mount — zdjęcie 1
1 / 4

Pioneer minisplit remote magnetic mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic mount for Pioneer minisplit remote

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a mounting plate to attach a Pioneer minisplit remote to a magnetic surface.  It was born out of frustration when epoxy wouldn't adhere the magnets to the back of the OEM cradle.  I used a heat set press to insert two M3 3x3 brass threaded inserts so I could screw the cradle to the plate.  I used M3x4rT screws left over from my Prusa kit build.

I had 12x3 N52 magnets on hand which are ridiculously strong and probably overkill, but this thing is definitely not going anywhere!  I included the Fusion file if your magnets are a different size.  The magnets should be a friction fit if you let the PLA cool down first.  I made their finish height proud of the surface for maximum adhesion.  I dabbed epoxy in the cavities before pressing them in for maximum adhesion just to be safe.

When you slice, put a cylinder modifier around the brass insert holes with 5 perimeters and 40% gyroid infill so the insert nut has something to bite on.

(This was the inaugural use of my 3DZWMAN insert press, so it's a bit of an experiment for me.)