1 / 4
Pioneer minisplit remote magnetic mount — image 1
1 / 4

Pioneer minisplit remote magnetic mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic mount for Pioneer minisplit remote

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a mounting plate to attach a Pioneer minisplit remote to a magnetic surface.  It was born out of frustration when epoxy wouldn't adhere the magnets to the back of the OEM cradle.  I used a heat set press to insert two M3 3x3 brass threaded inserts so I could screw the cradle to the plate.  I used M3x4rT screws left over from my Prusa kit build.

I had 12x3 N52 magnets on hand which are ridiculously strong and probably overkill, but this thing is definitely not going anywhere!  I included the Fusion file if your magnets are a different size.  The magnets should be a friction fit if you let the PLA cool down first.  I made their finish height proud of the surface for maximum adhesion.  I dabbed epoxy in the cavities before pressing them in for maximum adhesion just to be safe.

When you slice, put a cylinder modifier around the brass insert holes with 5 perimeters and 40% gyroid infill so the insert nut has something to bite on.

(This was the inaugural use of my 3DZWMAN insert press, so it's a bit of an experiment for me.)