1 / 7
Sloped Wall Dice Tray (EDC) Premium — zdjęcie 1
1 / 7

Sloped Wall Dice Tray (EDC) Premium

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fine lined dice tray for your precious dice. Cork coaster insert.

Ocena
0 / 5
Polubienia
7
Pobrania
5
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Keep your dice safe and sound and have them land softly on a cork surface. With this version of the Sloped Wall Dice Tray you can add a cork coaster as a liner for the bottom of the tray.

All you need:

  • 1x Wall part

  • 1x Bottom part

  • 6x Feet

  • 1x 100mm by 3mm cork coaster

  • flat head screwdriver

Just insert the coaster in the recessed circle in the bottom part, put the wall part on top and flip both upside down. Use the feet to lock the bottom in place. Please be gentle with the screwdriver, these are printed screws and there is no need to tighten these too much.

Print settings:

  • 0.2mm layerheight

  • 3 walls

  • PETG recommended, but any material will work

  • no supports  

If the screws are too tight, use negative xy-compensation to add some space between parts.

Disclaimer: The dice in the pictures are my own creation, if you're interested in that, check out my Instagram profile and contact me there. Same for print on demand. I don't have a shop and do commissions and print on demand as my time allows.

Tagi