Sloped Wall Dice Tray (EDC) Premium
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fine lined dice tray for your precious dice. Cork coaster insert.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 5
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep your dice safe and sound and have them land softly on a cork surface. With this version of the Sloped Wall Dice Tray you can add a cork coaster as a liner for the bottom of the tray.
All you need:
1x Wall part
1x Bottom part
6x Feet
1x 100mm by 3mm cork coaster
flat head screwdriver
Just insert the coaster in the recessed circle in the bottom part, put the wall part on top and flip both upside down. Use the feet to lock the bottom in place. Please be gentle with the screwdriver, these are printed screws and there is no need to tighten these too much.
Print settings:
0.2mm layerheight
3 walls
PETG recommended, but any material will work
no supports
If the screws are too tight, use negative xy-compensation to add some space between parts.
Disclaimer: The dice in the pictures are my own creation, if you're interested in that, check out my Instagram profile and contact me there. Same for print on demand. I don't have a shop and do commissions and print on demand as my time allows.