Earth Worm Jim EWJ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is Earth Worm Jim from the classic games.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Public Domain
I made this model because I used to love playing this game when I was younger. I hope that this model can provide some joy for somebody out there who also appreciated the game.
This model roughly sits just under 100 mm at this time. Please feel free to resize it how you'd like.
One issue that I would like to note, is that the spring is very difficult to remove the support from, so it's possible you might lose the spring but if you are very careful and print it big enough, I don't think you'll have an issue
I printed this in PLA
0.1 mm layer height as I wanted some better detail
6hours and 28 min
52.73 grams and 3 walls
3 walls