SodaStream cylinder air gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air gun attachment for QuickConnect SodaStram cylinders
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on the air gun attachment, Something like PALM did for the original cilinders, but ffor the more modern quick connect "pink" SodaStream cylinders.
This version works even better as the original thanks to much straighter gas path and construction of the new valves. More over less risk of freezing open. Still did not tested to empty whole cylinder in one go.
For safety reasons DO NOT use with full cilinders, gas injection injury is no joke!
The lever is intentionally flimsy to prevent this.
The top of the cap is intentionally vented to prevent ejections on deffective cylinders butr still do use the included clip to secure the cap onto the cylinder properly.
Lever attaches simply with piece of inserted filament.
You will also need pair of 20x26.5mm O-rings.
Both O-rings must be present for safe operation!
The model is intentionally hard to print and harder to clean supports from.
Print it from something strong.
Safety valve is purposefully not covered over.
Do not use without the retaining clip.