Improvements to XE-15 CAT 40mm AIRSOFT grenade launcher by Explosive Enterprises
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Firing pin (now 2 mm longer) front tube rear tube and rear tube cuplers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my improved parts on the XE-15 CAT. This was a design by Explosive Enterprises. I have improved Upon their firing pin, sling points, and made it so that you can 3D print your own tubes so that it is no longer confusing on what system to use when picking out PVC pipe for your tubing. Also modified is the receiver to accept Taggin launched projectiles from modified shower shells (see photo). Also modified rear sight (slightly). I have added Receiver pins so that you don't have to mess with screws.
As said in file notes. You will have to modify the receiver with holes. I have provided the files for Inventor and Fusion for you to do the modifying there.
You will need to shave down the ends of the receiver pins because they are slightly too thick for the toppers
The firing pin works well for the shell shown: https://www.evike.com/products/38165/Matrix-Eagle-Force-High-Power-Multi-Purpose-CNC-40mm-Airsoft-Grenade-Shell-Qty-One/