DeWalt DNP616 to Festool vacuum adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the odd small vacuum port on the DeWalt DNP616 router dust adapter to fit a Festool Cleantec vacuum hose.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
The DeWalt DNP616 dust adapter for their small plunge router base seems to expect a standard 1-1/4 inch OD vacuum fitting, but registers on the inside of the hose rather than the outer diameter. This adapter allows you to connect a Festool hose, either using the twist-lock on the Festool side, or simply a friction fit for both.
Printing Tips
I recommend printing this with a brim because there is very little surface contact with the bed. I used a 5mm inner brim, which is easily trimmed off with a knife or deburring tool.
No supports are needed.
CAD
As with most of my models, you can find the source here at Onshape. Feel free to remix following the CC license.
The Festool hose adapter is derived from another design of mine, available here at Onshape. You can find other parts using this and other adapters (along with useful models by other designers) in my Tool Adapters collection.
Please reach out to me if you would are interested in a custom adapter or would even like to help out by contributing some of your own.