1 / 6
Electrolux EXP26U338CW Dual Hose Intake Adapter (150mm) — zdjęcie 1
1 / 6

Electrolux EXP26U338CW Dual Hose Intake Adapter (150mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dual-hose 150mm intake mod for Electrolux EXP26U338CW AC. Prusa Mini compatible. Includes PrusaSlicer & STEP/CAD files.

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A dual-hose intake mod for the Electrolux EXP26U338CW portable air conditioner to help boost its cooling efficiency.

The main shroud is split into upper and lower halves to fit smaller print beds (it was printed on a Prusa Mini, taking up almost the entire build plate). It assembles using M3 bolts, with another set of M3 bolts used to secure the 150mm threaded hose ring.

You can re-use the native dust filter from the original vent with this print. Note that the filter notch alignments are slightly off in this design, so you will need to trim the plastic filter frame just a tiny bit to get it to sit flush.

I’ve included the PrusaSlicer project file (.3mf) with my tested orientation, supports, and print settings. Printed here in Prusament PLA Marble Grey.

Included all native SolidWorks CAD files for easy editing.

Added a STEP file of the filled-in original vent plate (no air holes). You can use this as a base template to design your own custom adapters. Note: The side clips on this base plate are untested, and notch alignments have the same slight offset as the main model.

The hose ring uses 7 evenly spaced M3 holes on a 165mm diameter circle. Feel free to remix the ring if your ducting needs a different thread or size.

Tagi