1 / 4
Miss Fortune's Blunder-Revolver Pistols — zdjęcie 1
1 / 4

Miss Fortune's Blunder-Revolver Pistols

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A custom design of Miss Fortune's pistols Shock and Awe, rendered as a mix of blunderbuss, flintlock and revolver.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Share Alike

This model was designed by me and a friend cosplaying Miss Fortune. We wanted to create a mix of blunderbuss, flintlock pistol and revolver with an ornate but at the same time modern or hextech-looking feeling. Most of all we did not want the pistols to appear overly bulky, which designs of Miss Fortune's pistols easily do. We were both quite happy with the result :)

The barrel assembly is built around a 12mm diameter round wooden stave, but the print files come with a plastic alternative (the "Barrel Pin") that works just as well as long as it is printed horizontally (like in the .3mf file).

(Optional) For full functionality, two 0.3 x 4 x 10 mm springs (or similar) can be used in the assembly of the chamber, which will allow the trigger and hammer to move. Sets with springs like this can easily be found on Amazon, but if you don't have them, the trigger and hammers can just be glued in place instead.

In the below video I will walk you through the assembly.

The model was designed in Onshape and is available here: https://cad.onshape.com/documents/6492f5cc355487e0de52fe42/w/b040eea3a930a7349c5a2902/e/0888c41b7c056e513f76574c

Tagi